RE: (ASCEND) Max not routing

["Yasin KAPLAN" <kaplan@intrakets.com.tr>]

Check, Answer Defaults>PPP Options>IP Routing=Yes?

Regards,

Yasin KAPLAN - INTRAkets
Teknik Mudur - Technical Manager
Tel:+90 (216) 3276930 Ext. 116 Fax: +90 (216) 3276924
http://www.intrakets.com.tr/ kaplan@intrakets.com.tr

> -----Original Message-----
> From: owner-ascend-users@max.bungi.com
> [mailto:owner-ascend-users@max.bungi.com]On Behalf Of Jake Messinger
> Sent: Monday, April 19, 1999 6:46 PM
> To: ascend-users@max.bungi.com
> Subject: (ASCEND) Max not routing
>
>
> Hi.
>
> I set up a max 1800 this weekend and I must be doing something stupid
> because I cant get it to route correctly.
>
> Its on a /26 subnet at address x.y.z.180 and I have set the pool to assign
> addresses starting at 181 which it gladly does. The max is on the same
> subnet as a couple of Lucent PM 3's. So anyway, I have the users set up in
> radius to get a framed address of 255.255.255.255 so it assigns an address
> which it does, and I also have framed netmask to 255.255.255.255.
>
> The user logs in, authenticates, etc... and can get to the
> gateway router at
> x.y.z.1 (its not on the same subnet as the max 1800), but I cannot access
> any other ip addresses within the same /26 subnet, such as the other 2 pm
> 3's. The only thing I can access is the max itself. I did a winpifg on a
> win 98 box dialing in and it claims that the netmask is 255.255.255.0. Why
> is it doing this?? There should be no netmask.
>
> I did some experimentation and if I enter a route on a linux box on the
> same subnet, from itself to the assigned ip address for a diales
> in session,
> then the remote session can access the linux box. Its like there
> is no route
> to the local subnet, but from the max box, I can access everything.
>
> Am I doing something wrong that is different from the way Livingston does
> things? Can I not assign remote ips on the max that are
> considered local to
> its ethernet? Do I have to put the max in a different subnet than the ip
> addresses I assign to the dial in users?
>
> ~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*
> -,._.,-*~
> Jake Messinger, VP.	ph:713-772-6690			Lucent Dealer
> AMS, Inc.		fx:713-774-3498 		Medical Billing
> 8300 Bissonnet  #400	jake@ams.com , ICQ# 4403734	Internet Services
> Houston, Texas  77074	www.ams.com/~jake		 and Hardware
>
> Adjunct Professor	University of Houston, CBA	 jake@uh.edu
> ~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*-,._.,-*~'`^`'~*
> -,._.,-*~
>
> 		INVENTOR OF the _.,-*~''~*-,._ SQUIGGLES (c) 1978
>
> ++ Ascend Users Mailing List ++
> To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd:	<http://www.nealis.net/ascend/faq>
>

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>