Re: (ASCEND) New TNT and CSMX cards

["William R. Charnock" <charnock@fastlane.net>]

There were no calls on the HDLC card -- I deleted the digital call-route
entries for all the CSMX cards and tried to re-connect (luckily, I haven't
put the new box in production) and I couldn't.  I connected to an
alternate server, and checked my syslog for any errors -- hence the CANT
OPEN HDLC messages... I rebooted the HDLC-2 card and once it came back up,
I had no problems connecting... Looks like another dreaded bug...

--
William Charnock
CTO, FastLane Internet Services
(817)-429-5263
netadmin@fastlane.net

On Wed, 7 Apr 1999, Paul Rolland wrote:

> Hello,
> 
> Strange... Have you been deleting call-route with the digital option
> ONLY on the csmx cards ?
> 
> My config is :
> CMSX only have routing for analog,
> HDLC only have routing for digital,
> and it's fine...
> 
> Also, did you check that the HDLC card is UP ? and that you have enough 
> HDLC resources ?
> 
> Regards,
> Paul
> 
> Dans son message (In his/her message), William R. Charnock ecrivait (wrote) :
> > I have done that and it seems to be working -- but here is another problem
> > -- on all my TNT's, I get the following message after a short while of the
> > box being up:
> > 
> > Apr  6 21:17:32 fw-tnt1 1/3: _openNewChannel [MBID 1378] CANT OPEN HDLC
> > CHANNEL(s)     name <>, wanIndex 2, callId 0, mode 0 
> > Apr  6 21:18:01 fw-tnt1 1/3: _openNewChannel [MBID 1381] CANT OPEN HDLC
> > CHANNEL(s)     name <>, wanIndex 2, callId 0, mode 0 
> > Apr  6 21:22:59 fw-tnt1 1/3: _openNewChannel [MBID 1383] CANT OPEN HDLC
> > CHANNEL(s)     name <>, wanIndex 2, callId 0, mode 0 
> > Apr  6 21:24:49 fw-tnt1 1/3: _openNewChannel [MBID 1385] CANT OPEN HDLC
> > CHANNEL(s)     name <>, wanIndex 2, callId 0, mode 0 
> > Apr  6 21:25:11 fw-tnt1 1/3: _openNewChannel [MBID 1387] CANT OPEN HDLC
> > CHANNEL(s)     name <>, wanIndex 2, callId 0, mode 0 
> > Apr  6 21:29:00 fw-tnt1 1/3: _openNewChannel [MBID 1386] CANT OPEN HDLC
> > CHANNEL(s)     name <>, wanIndex 2, callId 0, mode 0 
> > Apr  6 21:29:32 fw-tnt1 1/3: _openNewChannel [MBID 1390] CANT OPEN HDLC
> > CHANNEL(s)     name <>, wanIndex 2, callId 0, mode 0 
> > 
> > When this occurs, I can no longer accept inbound ISDN calls.  I have to
> > reset the HDLC-2 card to get the server to accept ISDN calls.  Is Ascend
> > aware of this problem?  Is there a fix coming?
> > 
> > --
> > William Charnock
> > CTO, FastLane Internet Services
> > (817)-429-5263
> > netadmin@fastlane.net
> > 
> > On Wed, 7 Apr 1999, Paul Rolland wrote:
> > 
> > > Yes, do it, it works...
> > > 
> > > Anyhow, I'd like to take opportunity of this message to send out a big
> > > question :
> > > As it seems there are more and more people with TNT, HDLC-2 and CSMX
> > > cards, could you please tell me, either on the list or privately,
> > > what you think of these and TAOS 7.0.4.
> > > Do you have problem ? Strange messages coming out of the box ? New
> > > trouble with users ? Connection problems ?
> > > 
> > > Regards,
> > > Paul
> > > 
> > > Paul Rolland, rol@oleane.net
> > > France Telecom Oleane/Direction Technique/Directeur
> > > France Telecom Oleane/Technical Direction/Director
> > > 
> > > --
> > > 
> > > Please no MIME, I don't read it - Pas de MIME, je ne le lis pas
> > > Please no HTML, I'm not a navigator - Pas d'HTML, je ne suis pas un navigateur
> > > 
> > > "The best way to predict the future... is to create it !"
> > > 
> > 
> 
> Paul Rolland, rol@oleane.net
> France Telecom Oleane/Direction Technique/Directeur
> France Telecom Oleane/Technical Direction/Director
> 
> --
> 
> Please no MIME, I don't read it - Pas de MIME, je ne le lis pas
> Please no HTML, I'm not a navigator - Pas d'HTML, je ne suis pas un navigateur
> 
> "I hope some day you'll join us, and the world would be as one" - J. Lennon
> 

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>