Re: (ASCEND) Direct PC

["Tim Jung" <tjung@igateway.net>]

Because behind each Pipeline 50 sits a Livingston PM2e30 with about 10-20
phone lines and modems. Also behind each Ascend Max1800 sits about 2-4 of
the Max4048. So we are talking more about WAN connections than a single
workstation or machine.

It also still doesn't help me with the problem that none of my remote pops
can use PC Direct but my local users can use Direct PC with no problems.

Does anyone have any ideas? Yes I am sure it is a routing issue, the
question is what is the routing problem and how do I fix it?

Tim Jung
System Admin
Internet Gateway Inc.
tjung@igateway.net


-----Original Message-----
From: Mitchell Arnone <mitchell.arnone@occ.treas.gov>
To: Matt Holdrege <matt@ascend.com>; @x400hub.net.treas.gov
<":@mailhub-1.net.treas.gov:owner-ascend-users"@max.bungi.com>;
ascend-users@bungi.com <ascend-users@bungi.com>
Date: Thursday, April 01, 1999 7:13 AM
Subject: re: (ASCEND) Direct PC


>If you have a remote device (say a Pipe 75) connecting to something like a
>MAX and that Pipe has only the one connection, why are running RIP.  Just
>do IP routing... no RIP no NAT... no bridging... no nothing.
>
>I have about 30 Pipes connecting to a TNT configured in this manner.  The
>client PC have their respective Pipes as their default gateway and all
>works well... very well.
>
>Mitch
>-------------
>Original Text
>From: "Tim Jung" <tjung@igateway.net>, on 3/30/99 9:31 PM:
>To: SMTP@DC2@OCC[<ascend-users@bungi.com>], SMTP@DC2@OCC["Matt Holdrege"
><matt@ascend.com>]
>
>Anyone know why I can't get Direct PC to surf the web when they connect up?
>At first I though it was because proxy arp wasn't turned on, it is. They
>can
>dial into the NOC's Max 4048 and surf no problem. But the remote pops that
>connect in to the NOC on a Max 4004 with no analog modems only ISDN, they
>don't work. I have RIP v2-both turned on, on the Max 4004, and the remote
>Max1800 and Pipe 50, and Pipe 75. In two pops they dial into a PM2e30, in
>the other pop they dial into Max4048's. I used to have this working when I
>had everything running into a Pipeline 400T. Then I upgraded to the Max4004
>and upgraded that software and everything stopped working. I know it isn't
>a
>RADIUS issue because we only have 1 RADIUS database on 2 servers. They can
>dial into the NOC pop and it works, but not the remote pops. It must be
>something in the Max 4004 but I'm not sure what it would be.
>
>Anyone have any clues that I might look for?
>
>Tim Jung
>System Admin
>Internet Gateway Inc.
>tjung@igateway.net
>
>
>
>++ Ascend Users Mailing List ++
>To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
>++ Ascend Users Mailing List ++
>To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd: <http://www.nealis.net/ascend/faq>

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>