Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Forcing an IP address
ThanX,
I manage to connect without ANY modification, but the phone number, to another system.
I kinda got around it with the "Ethernet/Mod Config/WAN option/Pool-only = yes" setting , but it would stop creating routes for routers that used to work fine with the setting set to No....
Any Ideas ?
Frantzcy
At 09:42 AM 9/22/98 -0400, Tim Connolly wrote:
> I think your problem is in the way you have PPP configured on your
>Linux box. You didn't give much info below, but I bet if you setup is
>anything close to "default" you will find a few commands at the bottom
>of the /etc/ppp/options file which explains how PPP decides whether to
>use the host assigned address or its own. I believe these two lines are
>commented out by default (and should be in my oppinion), but you may try
>uncommenting them and see if that helps any. good luck!
>
>Frantzcy Paisible wrote:
>
>> Hi all,
>>
>> Here is this week's "My Max is acting up" message:
>>
>> Maybe you encountered this one already...
>>
>> I have a linuxbox with an ethernet card and a modem.
>> The ethernet card as the local address 192.168.0.1.
>> The linuxbox connects to the max using a 28.8 modem.
>>
>> The max will not give the linuxbox an IP from it's pool,
>> It will leave the linuxbox with the IP number of the
>> ethernet card (192.168.0.1), not with of of the pool.
>>
>> I've tried but I can't force it with Framed-Address, it
>> gives me an error 101 and disconnects the call.
>>
>> On the linuxbox, I tryied the 0.0.0.0:0.0.0.0 option, no
>> success.
>>
>> I had the exact same problem with a Pipeline, it wasn't
>> considered as a problem since that was the way I wanted
>> it to work.
>>
>> How can I get around that problem ?
>>
>> Frantzcy
>>
>> --
>> "If your desktop is full, increase your resolution!"
>> "No more space on your screen for POST-ITs, get a bigger screen"
>>
>> Frantzcy Paisible
>> frantzcy@mtl.net
>> ++ Ascend Users Mailing List ++
>> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>> To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
>-- Tim Connolly tec@mountain.net MountainNet, Inc.
>-- (304) 594-9075 ext. 37 2816 Cranberry Square
>-- fax (304) 594-9088 Morgantown, WV 26505
>
>
>++ Ascend Users Mailing List ++
>To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
--
"If your desktop is full, increase your resolution!"
"No more space on your screen for POST-ITs, get a bigger screen"
Frantzcy Paisible
frantzcy@mtl.net
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: