Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: (ASCEND) shared D-Channels on PRI
On Wed, 14 Oct 1998, Craig Whitmore wrote:
> We have 31 channel PRI's (16th channel is D-channel) and 1-15,17-31 as
> normal channels(30 + 1 D Channel).. what is NFAS? Can you give an example
> of its use? Will it work in New Zealand.? Telecom has to "invent" PR2 so we
> could hunt across PRI's (as they had broken NEC (I think) switches) . Clear
> in NZ can hunt across PRI's without any problem as they use different
> hardware (Don't know what kind).
> Wed love to do hunting across PRI's on normal PRI's. Telecom said it could
> be done. But I was told none of the equipment (cisco, ascend,shiva....)
> could do it (Only PABX's etc)
>
> Sig Mode=R2
> Switch Type=CAS
> Framing Mode=2DS
> Complete=end-of-pulsing
31 channel PRIs..that's something new to me.
If we have 2 PRIs here, the relevant config is something like this..
PRI 1:
Sig Mode=ISDN_NFAS
NFAS ID num=1
PRI 2:
Sig Mode=ISDN_NFAS
NFAS ID num=2
I guess the international codes are different, as that I dont have R2
signaling or a CAS switch type option.
Have you contacted Ascend at all?
-Tony
.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-.
Anthony J. Biacco Network Administrator/Engineer
admin@intergrafix.net Intergrafix Internet Services
"The best way to predict the future, is to invent it."
http://cygnus.ncohafmuta.com http://www.intergrafix.net
.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-.
>
> -----Original Message-----
> From: System Administrator [SMTP:admin@intergrafix.net]
> Sent: Wednesday, October 14, 1998 3:31 PM
> To: Craig Whitmore
> Cc: 'ascend-users@bungi.com'
> Subject: RE: (ASCEND) shared D-Channels on PRI
>
> On Wed, 14 Oct 1998, Craig Whitmore wrote:
>
> > As far as I know you can't under PRI on the max.. telecom here had to use
> > PR2 to be able to hunt across PRI's. If its possible I'd like to know. As
> > pr2 is a big hassel
> >
>
> you can share D-channels between PRIs with use of NFAS. give each PRI
> an NFAS id. Configure your 1 PRI as 23 switched+D and the other as 24
> switched.
> Now if you can do it across chassises, i dont know, you would have to try.
>
> -Tony
> .-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-.
> Anthony J. Biacco Network Administrator/Engineer
> admin@intergrafix.net Intergrafix Internet Services
>
> "The best way to predict the future, is to invent it."
> http://cygnus.ncohafmuta.com http://www.intergrafix.net
> .-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-._.-.
>
> > Thanks
> > Craig Whitmore
> > IGRIN Internet
> >
> >
> > -----Original Message-----
> > From: Mark Brody [SMTP:mark@opusnet.com]
> > Sent: Wednesday, October 14, 1998 10:51 AM
> > To: ascend-users@bungi.com
> > Subject: (ASCEND) shared D-Channels on PRI
> >
> > Question on shared d-channels:
> >
> > I have a MAX2024 and a 4048. The 2024 has 1 PRI with a d-channel. I have
> > added another PRI connecting to the 4048 in the same hunt group. Can the
> > PRI's share 1 d-channel?
> >
> >
> >
> > | M a r k B r o d y |
> > | Opus Creative Group Inc. |
> > | Portland, Oregon USA |
> > ++ Ascend Users Mailing List ++
> > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> > To get FAQ'd: <http://www.nealis.net/ascend/faq>
> >
> > ++ Ascend Users Mailing List ++
> > To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> > To get FAQ'd: <http://www.nealis.net/ascend/faq>
> >
>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups:
References: