Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ASCEND) PPP-noNCPs-open

Ken,


If you are assigning IP addresses make sure the client is setup to accept
whatever you assign. Also make sure Ethernet->Mod Config->WAN Options->Pool
Only=Yes if you use address pools. If you are using static addresses, make
sure the Framed-Address and Netmask parameters match what is setup on the
customer router. 

If this does not fix it, enter diagnostic mode and take a pppif trace. Type
'pppif' to toggle the debug on and off.


//dean



At 08:32 AM 10/6/98 -0500, Keith Crabtree wrote:
>
>this usually means that ip routing is not enabled on the router.
>
>
>/////////////////////////////////////////////////////////////////
>// Keith Crabtree // Network Administrator // Networks On-Line //
>//  713.554.7100  //     keith@nol.net     //   icq: 2068724   //
>/////////////////////////////////////////////////////////////////
>
>On Mon, 5 Oct 1998, Ken Rea wrote:
>
>> 
>> Were trying to get a client that has some type of Lucent dial-in router on
>> our 4048's.  Anyway in the radius logs I keep seeing for the Disconnect
>> cause: PPP-noNCPs-open.  Then on the Connect-Progress it has:
>> Ipncp-Opening.  What is a NCP and what do I need to do to solve this
>> problem?  We are assigning them an IP address when they dial in.
>> 
>> Thanks,
>> 
>> Ken Rea
>> wildcat@pcez.com
>> 
>> ++ Ascend Users Mailing List ++
>> To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
>> To get FAQ'd:	<http://www.nealis.net/ascend/faq>
>> 
>
>++ Ascend Users Mailing List ++
>To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd:	<http://www.nealis.net/ascend/faq>
>
>
===============================================================
Dean Frye.                      Escalation and Regional Support
                            ________
Ascend Asia Pacific        |   /\   |   http://apac.ascend.com/
Level 38/55 Collins        |  /__\  |   em: dfrye@ascend.com.au
Melbourne, Victoria        | //  \\ |   Voice:   +61.3.96567000
Australia 3000             |/ \__/ \|   Mobile:   +61.418546635
                             ASCEND     
===============================================================
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>
References: