Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ASCEND) NAT Help - 1st experience

I need a bit more guidance on this issue....


At 11:31 PM 3/23/98 -0800, you wrote:

>So, here's how it should look:
>
>My Addr=<IP ADDRESS OF INTERNAL LAN, or in your words illegal address>
Okay, fine

>Rem Addr=<VALID IP ADDRESS>
Which valid IP address? The remote end's ip (my MAX) or the LEGAL address I
want NAT to use?


>Not sure how to configure the Max side, because I have no experience with
>it. 
Does anyone know how to set up the MAX side?

The manual for the Pipeline says that the MAX must assign a dynamic
address. Is this true? So every time the connection is established, NAT
potentially uses a different address (single IP translation used)?

>
>Regards,
>
>* T0uchT0ne #
>
>
>At 06:41 PM 23/03/98 -0800, you wrote:
>>Haven't had a need to set up NAT, but came across a client site that
>>already has an existing illegal scheme that they insist on keeping.
>>
>>Here's the config:
>>
>>My end: Max2024 - 6.0
>>Client end: Pipe 50 - 5.1A
>>connection: ISDN
>>
>>I turned on NAT/single IP on the P50. My question is, what do I set the
>>Pipeline's IP Address to be - an illegal address (192.168.100.254/24) or a
>>legal address (198.145.76.97/26)? Can I just give it a second address -
>>i.e, IP Addr=198.145.76.97/26 and 2nd Address=192.168.100.254 so I can
>>still telnet to it from my side?
>>
>>what do I set the LAN Address to on the MAX side of the connection?
>>
>>I guess if someone could just explain exactly what I need to do to make
>>this work, I'd be set.
>>
>>Thanks,
>>
>>
>>
>>
>>
>>|    M a r k  B r o d y    |
>>| Opus Creative Group Inc. |
>>|   Portland, Oregon USA   |
>>++ Ascend Users Mailing List ++
>>To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
>>To get FAQ'd:	<http://www.nealis.net/ascend/faq>
>> 
> 



|    M a r k  B r o d y    |
| Opus Creative Group Inc. |
|   Portland, Oregon USA   |
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>
References: