Re: (ASCEND) TNT 2.0 code

["Tom Gwilt" <tgwilt@suite224.net>]

This happened to me, too. The solution was to make sure that the system ip
address and the shelf-controller ip-address (as well as any other ip-address
referring to the TNT itself) were the same.

I originally had the shelf controller set to a 10.x.x.x and the system
address as a 209.176.x.x.

Good luck
-----Original Message-----
From: Andy Walden <andy@enigma.mtco.com>
To: ascend-users@bungi.com <ascend-users@bungi.com>
Date: Monday, March 16, 1998 11:04 PM
Subject: (ASCEND) TNT 2.0 code


>I rebooted my TNT, reformatted my flash, but when I try to tftp the tar in
>I get 'No Route to Host'. I can't ping anything....this would constitute a
>bad thing, yes?
>
>Sincerely,
>Andy Walden
>System Administrator
>MTCO Communications
>1-800-859-6826
>
>++ Ascend Users Mailing List ++
>To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd: <http://www.nealis.net/ascend/faq>

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>

---

• Prev by Date: Re: (ASCEND) [rootshell] Security Bulletin #16 (fwd)
• Next by Date: Re: (ASCEND) Packet filter for port 9 attack
• Prev by thread: (ASCEND) TNT 2.0 code
• Next by thread: (ASCEND) just to let you know...
• Index(es):
  • Main
  • Thread