Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Pipeline 50 Routing Problem - I think [smirk]
On Tue, 10 Mar 1998, Kevin A. Smith wrote:
> When configured for NAT, the authentication is the same, BUT the address
> you are assigned is not necessarily the same address that you configured
> in the Pipeline. If they are assigning you a dynamic address from the RAS,
> or even a specific static address that does not match what you have
> configured - then the authentication will fail during "IPCP" negotiation.
> The PPP auth may well succeed in both cases, but they don't like the address
> you are negotiating to use when not set to NAT.
Well, I configured a P130 (5.1Ap8) according to the directions at
http://www.ascend.com/895.html for NAT routing. I can get the P130 to
see the local network and the external network (via ISDN connection), but
the two aren't communicating with each other. I opened TT190113 on this
and have as yet to hear a response on it. Any ideas?
(btw, I even tried a few things _not_ listed and that didn't help either)
--
Joseph Hickman
Director of Network Operations / System Administration
joseph@psn.net
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups:
References: