Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
(ASCEND) NAT on P75: Incoming Connections Possible only on Well-Known Ports
I have found that when you make changes to your translations (ports, etc)
you have to hang up and redial or possibly reset the unit. They don't
take effect immediately, it's been my experience.
-Rob-
> From: "Rylan Luke" <rylan@rymar.com>
> Date: Tue, 24 Feb 1998 09:25:56 -0800
> Subject: (ASCEND) NAT on P75: Incoming Connections Possible only on Well-Known Por
>
> I am using a P75, 6.0b4, single IP address NAT.
> Outgoing connections are fine from multiple machines on my local
> subnet.
>
> I have defaulted all incoming connections to a single workstation.
>
> My problem is that certain ports do not get connected to the default
> workstation; for example, I am running a telnet server on the
> standard port, 23. This works fine. If I shift the telnet server to
> port 24, however, I can't get a connection.
>
> I have tried adding a specific route as a Static Mapping, but this
> does not help.
>
> As another example, I can connect to my SMTP server on port 25, but
> not the POP3 server on port 110. The servers all work fine on the
> local network, so I think I have everything set up correctly.
>
> Any ideas?
> _______________________________
> Rylan Luke (rylan@rymar.com)
> Rymar Engineering
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd: <http://www.nealis.net/ascend/faq>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups: