Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: (ASCEND) Multilinking analog modems

Group,

I followed the settings below on a MAX4004 running 6.0.
Everything works well when the profile is on the MAX, but when I move
this user to
RADIUS,  the second login (I bring up terminal window after dialing)
gives me
and error message from the MAX : "Account aleady in use"

My user account looks like this :

testdual  Password = "dual", Ascend-PW-Expiration = "Aug 13 2000"
        Ascend-PW-Lifetime = 900,
        Change-Password = "Yes",
        Framed-Protocol = MPP,
        Framed-Address = 17.27.10.10,
        Ascend-Dialout-Allowed = Dialout-Allowed,
        Ascend-Maximum-Channels = 2,
        Framed-Netmask = 255.255.255.255,
        Framed-Routing = Listen,
        Ascend-Idle-Limit = 1200

Any other setting required on the MAX or RADIUS profile ?  Any help is
appreciated.

Thanks,
Nelson Llabona
	-----Original Message-----
	From:	Kevin Smith [SMTP:kevin@ascend.com]
	Sent:	Monday, December 15, 1997 2:42 PM
	To:	dbotkin@probe.net; steve@i-plus.net
	Cc:	ascend-users@bungi.com
	Subject:	Re: (ASCEND) Multilinking analog modems

	...

	Any since 5.0Ai4 should work...

	>which one.  I was using Win95 OSR2, one internal 28.8 and one
external
	>33.6 (both connected at 26.4).  Worked like a champ.  You have
to set
	>Ether->Answer->Encaps->MPP=Yes, Ether->Answer->PPP Options->Max
Ch
	>Count=2, and maybe shared profiles=Yes, 

	No shared profiles is not needed.

	...

	Kevin


++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>