Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Telnet to the router when using NAT?
I have 2-digit octet's in 6.0 and it works fine.
At 04:56 AM 3/2/98 -0700, Michael Deck wrote:
>I noticed this problem with a P75. Dunno if it is related but I went to the
>3-digit-octet naming scheme (inside address of router is 192.168.100.100)
>and suddenly I could telnet to the router again. this was in 5.1Ap9.
>
>-Mike
>
>(Craving humblest forgiveness for virgin post)
>
>At 02:04 PM 3/2/98 +0900, Peter Chow wrote:
>>Phil,
>>
>>I was able to telnet into my P50 using your configuration.
>>Dst Port #=23. Did you remember to drop your connection
>>and re-establish it after your changes?
>>
>>Thomas Falk Claezon wrote:
>>>
>>> On 27 February 1998, Phillip Vandry <vandry@Mlink.NET> wrote:
>>> > How can you telnet to a Pipeline which is NATting with Single IP
address,
>>> > coming from the public side?
>>> >
>>> > I have tried a static map of the form:
>>> >
>>> > x >Valid=Yes x
>>> > x Dst Port #=23 x
>>> > x Protocol=TCP x
>>> > x Loc Port #=23 x
>>> > x Loc Adrs=192.168.2.254 x
>>> >
>>> > Where 192.168.2.254 is the inside (Ethernet) address of the Pipeline,
but
>>> > this doesn't work.
>>>
>>> Try:
>>>
>>> x >Valid=Yes x
>>> x Dst Port #=2023 x
>>> x Protocol=TCP x
>>> x Loc Port #=23 x
>>> x Loc Adrs=192.168.2.254 x
>>>
>>> Using Dst Port 2023 (etc..) works ok for me using b.p75 5.1Ap6.
>>>
>>> Now use: telnet <public.P75.address> 2023
>>>
>>> [Zap]
>>>
>>> > -Phil
>>> [Zap]
>>>
>>> /Falk
>>> --
>>> Thomas Falk Claezon ERICSSON, AXE Research and Development
>>
>>----------------------------------------------------------
>>Peter Chow
>>Chief Technical Advisor
>>InterQ Inc.
>>Tokyo, Japan
>>peter@interq.or.jp
>>----------------------------------------------------------
>>++ Ascend Users Mailing List ++
>>To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>>To get FAQ'd: <http://www.nealis.net/ascend/faq>
>>
>>
>
>Michael Deck
>Cleanroom Software Engineering, Inc.
>++ Ascend Users Mailing List ++
>To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
Matt Holdrege http://www.ascend.com matt@ascend.com
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: