Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Telnet to the router when using NAT?
Phil,
I was able to telnet into my P50 using your configuration.
Dst Port #=23. Did you remember to drop your connection
and re-establish it after your changes?
Thomas Falk Claezon wrote:
>
> On 27 February 1998, Phillip Vandry <vandry@Mlink.NET> wrote:
> > How can you telnet to a Pipeline which is NATting with Single IP address,
> > coming from the public side?
> >
> > I have tried a static map of the form:
> >
> > x >Valid=Yes x
> > x Dst Port #=23 x
> > x Protocol=TCP x
> > x Loc Port #=23 x
> > x Loc Adrs=192.168.2.254 x
> >
> > Where 192.168.2.254 is the inside (Ethernet) address of the Pipeline, but
> > this doesn't work.
>
> Try:
>
> x >Valid=Yes x
> x Dst Port #=2023 x
> x Protocol=TCP x
> x Loc Port #=23 x
> x Loc Adrs=192.168.2.254 x
>
> Using Dst Port 2023 (etc..) works ok for me using b.p75 5.1Ap6.
>
> Now use: telnet <public.P75.address> 2023
>
> [Zap]
>
> > -Phil
> [Zap]
>
> /Falk
> --
> Thomas Falk Claezon ERICSSON, AXE Research and Development
----------------------------------------------------------
Peter Chow
Chief Technical Advisor
InterQ Inc.
Tokyo, Japan
peter@interq.or.jp
----------------------------------------------------------
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups:
References: