Re: (ASCEND) What do I need besides a MAX to add an additional POP?

To: peter@cstone.net (Peter Clausen)
Subject: Re: (ASCEND) What do I need besides a MAX to add an additional POP?
From: Phillip Vandry <vandry@Mlink.NET>
Date: Fri, 8 Aug 1997 18:21:12 -0400 (EDT)
cc: ascend-users@bungi.com
In-reply-to: Your message of "Fri, 08 Aug 1997 16:04:16 EDT." <3.0.32.19970808160415.00844e80@cstone.net>
Sender: owner-ascend-users@max.bungi.com

> I'm looking at adding my first secondary POP about 25 miles from my main
> location.
> 
> I have a 4000 equipped with 48 modems (all 4 T1 interfaces are active).
> 
> My thought is to connect channelized T-1's to 2 of the ports, and then have
> a dedicated T-1 connection via the 3rd port back to my main POP.
> 
> My main POP of course is running all the needed services (Radius, POP3,
> news server, www, etc).
> 
> Do I need any additional equipment at the new POP or can everything just
> run over the T-1 back to my main POP?

Short answer: By all means.

You will have to give it an Ethernet address anyway, as a MAX depends on
its Ethernet port IP address (give it a 255.255.255.252 subnet).

-Phil
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>

References:

(ASCEND) What do I need besides a MAX to add an additional POP?

From: peter@cstone.net (Peter Clausen)

Prev by Date: (ASCEND) Re: Zoom 14.4 V.32bis modems...?
Next by Date: Re: (ASCEND) RADIUS - Blocking multiple logins by same user
Prev by thread: (ASCEND) What do I need besides a MAX to add an additional POP?
Next by thread: (ASCEND) Low bit/high bit subnets
Index(es):
- Main
- Thread