Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) radius & backup radius
In message <Pine.GSO.3.96.970802102217.2714K-100000@nsa.ecosoft.com>, "Steven P
. Crain" writes:
>On Fri, 1 Aug 1997, Troy Wollenslegel wrote:
>
>> I have radius running on a couple of machines now, today our main radius ser
>ver
>> crashed. The ascends started verifying to the 2nd radius server like it shou
>ld.
>> When the 1st server came back up the Ascends did not start going back to it.
> I
>> had to go in and change some settings for radius (enough so it would ask me
>> if I wanted to save the changes) then re- Upd Rem Cfg to get the new radius
>> settings. Is there any way to easily tell the ascend to look back at the
>> 1st radius server instead of the 2nd?
>
>Easiest way I've found is to shutdown the backup server for a few minutes.
>Then the Maxen switch back by themselves.
Hi,
you have also the option to set the radius-server the MAX should use via SNMP.
Regards
Andreas
>
>----------------------------------------------------------------------------
>Steven P. Crain scrain@shore.net http://www.shore.net/~s
>crain
>Shore.Net Unix Development and Administration
>An ISP with Excellence in the Greater Boston Area.
>
>++ Ascend Users Mailing List ++
>To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd: <http://www.nealis.net/ascend/faq>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: