678's don't have much cpu power by today's standards. And NAT is always somewhat stateful, it has to learn and keep a mapping of ip and port combos that have been assigned statically and dynamically and keep track of when they have been terminated or need to time out. A while back when I used gamespy to do a ping and game status check on a list of 1000+ servers the first 50 or so would always ping good, and the rest were 1000+ms. When pinged individually they would ping well. The 678 can't process high numbers of packets real well. This is likely related to the OP's issue. On 7/23/2010 8:29 PM, Justin Krejci wrote: > Your 10mbps ethernet interface on the router should be fine with any amount of traffic from the DSL. The 678 is not stateful I am pretty sure so I doubt it has any connection exhaustion issues. I have in any case run many high volume nmap scans across my 678 with never an issue. > > Sent via BlackBerry from T-Mobile >