The good news is that it is supported, but it looks like a lot of work
to make it go. http://www.houseofcraig.net/acx100_howto.php has the
details on drivers and configurations to use the ACX 111 chipset. They
mention that it will work with ndiswrapper but they strongly recommend
their driver instead. The project is at http://acx100.sourceforge.net/

--rick

>
>
> On 5/20/05, *Sam MacDonald* <smac at visi.com <mailto:smac at visi.com>> wrote:
>
>     From the lspci -v I get
>         Subsystem: Linksys: Unknown device 0033
>     From the lsmod I get
>         nothing...
>
>     Sam.
>
[snip]

>     0000:06:00.0 Network controller: Texas Instruments ACX 111 54Mbps
>     Wireless Interface
>         Subsystem: Linksys: Unknown device 0033
>         Flags: bus master, medium devsel, latency 64, IRQ 11
>         Memory at 10c20000 (32-bit, non-prefetchable) [size=8K]
>         Memory at 10c00000 (32-bit, non-prefetchable) [size=128K]
>         Capabilities: <available only to root>
>