It looks like Gentoo supports the module as a package. q root # emerge -s acx100 Searching... [ Results for search key : acx100 ] [ Applications found : 1 ] * net-wireless/acx100 [ Masked ] Latest version available: 0.2.0_pre8-r5 Latest version installed: [ Not Installed ] Size of downloaded files: 275 kB Homepage: http://acx100.sourceforge.net/ Description: Driver for the ACX100 and ACX111 wireless chipset (CardBus, PCI, USB driver disabled because it does not compile) License: GPL-2 as-is q root # On 5/20/05, Richard Hoffbeck <rwh at visi.com> wrote: > > The good news is that it is supported, but it looks like a lot of work > to make it go. http://www.houseofcraig.net/acx100_howto.php has the > details on drivers and configurations to use the ACX 111 chipset. They > mention that it will work with ndiswrapper but they strongly recommend > their driver instead. The project is at http://acx100.sourceforge.net/ > > --rick > > > > > > > On 5/20/05, *Sam MacDonald* <smac at visi.com <mailto:smac at visi.com>> > wrote: > > > > From the lspci -v I get > > Subsystem: Linksys: Unknown device 0033 > > From the lsmod I get > > nothing... > > > > Sam. > > > [snip] > > > 0000:06:00.0 Network controller: Texas Instruments ACX 111 54Mbps > > Wireless Interface > > Subsystem: Linksys: Unknown device 0033 > > Flags: bus master, medium devsel, latency 64, IRQ 11 > > Memory at 10c20000 (32-bit, non-prefetchable) [size=8K] > > Memory at 10c00000 (32-bit, non-prefetchable) [size=128K] > > Capabilities: <available only to root> > > > > > _______________________________________________ > TCLUG Mailing List - Minneapolis/St. Paul, Minnesota > tclug-list at mn-linux.org > http://mailman.mn-linux.org/mailman/listinfo/tclug-list > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://shadowknight.real-time.com/pipermail/tclug-list/attachments/20050520/def26b82/attachment.htm