Jay, I had something very similar on my Asus CUSL2-C. You may not "want" to do this, but see if your problem is solved. Disable the "Jumper Free Mode". On my board this marked JEN & you want pins 1&2. Make sure you then set your DIP switches for your CPU. This solved the goofy behavior I was having on reboots. Back to the future! ; ) >Oh, and I doubt it's a bad board as I have 2 of them, and it does it with >both. Also, I have the latest BIOS on them both and I've tried downgrading >and it still does it. > >Jay > > > -----Original Message----- > > From: Austad, Jay [mailto:austad at marketwatch.com] > > Sent: Thursday, November 15, 2001 2:13 PM > > To: 'tclug-list at mn-linux.org' > > Subject: [TCLUG] Unix bad on the Asus TUSL2-C motherboard? > > > > > > Ok, with BSD or Linux on a box with the Asus TUSL2-C > > motherboard, I'm having a problem... > > > > When I turn the box on, it boots just fine, but if I do a > > "reboot" or "shutdown -r now", the box will hang before it > > posts again and some little alarm on the motherboard will > > start beeping. It then requires a power off to work correctly again. > > > > However, if I do a "shutdown -h now" and then a ctrl-alt-del, > > it boots just fine. Everything works fine with windows on > > it. Does anyone know of any reason why a motherboard would > > not come back during a soft reboot? > > > > Jay