Real Time Ascend Maling List Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Max 4060 --> Cisco 5200
Have you tried looking at the debug logs on either/both machines to
work out what is happening?
What is the cisco config?
Matthew
At 12:38 PM 5/15/00 +1000, Craig wrote:
>We have a MAX 4060 7.0.4 connecting to a Cisco 5200 via 4 E1 channels (256k
>ISDN). Encaps = MP, Call Type = Perm/switched, Base Ch Count = 4, Max Ch
>Count = 4. Using these settings the link should stay connected at 256k
>regardless of the load. About once every 2 or 3 days the link drops down to
>192k, but whats even worse the flow of data stops. So although the link
>appears to still be up you can't ping the cisco box at the other end. If we
>make the call hangup it automatically dials out straight away with 4
>channels and the problem is fixed.
>
>I would have thought that with the settings we have, that when it does drop
>a channel it would know that the base ch count is wrong and try and redial
>anyway?
>
>Anyone know what could be wrong or anyone had experience connecting a MAX
>4060 to a Cisco 5200 seen this problem?
>
>Any help/suggestions appreciated.
>
>
>Many Thanks
>
>Craig Morgan
>Barneys Online Communications
>
>++ Ascend Users Mailing List ++
>To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>