(ASCEND) Max 4060 --> Cisco 5200

[Craig <barneys@fastlink.com.au>]

We have a MAX 4060 7.0.4 connecting to a Cisco 5200 via 4 E1 channels (256k
ISDN). Encaps = MP, Call Type = Perm/switched, Base Ch Count = 4, Max Ch
Count = 4. Using these settings the link should stay connected at 256k
regardless of the load. About once every 2 or 3 days the link drops down to
192k, but whats even worse the flow of data stops. So although the link
appears to still be up you can't ping the cisco box at the other end. If we
make the call hangup it automatically dials out straight away with 4
channels and the problem is fixed.

I would have thought that with the settings we have, that when it does drop
a channel it would know that the base ch count is wrong and try and redial
anyway?

Anyone know what could be wrong or anyone had experience connecting a MAX
4060 to a Cisco 5200 seen this problem?

Any help/suggestions appreciated.


Many Thanks

Craig Morgan
Barneys Online Communications 

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>