(ASCEND) Re:

["Ashley" <ascendlist@asnet.com.au>]

I'm assuming this was answered before now, or you've worked out how to do
it.  The best way is to pull the information off via TFTP.  Go into DEBUG, &
do a TSAVE....  When you want to re-instate the config, you do a TRESTORE.
Doing it this way, you get passwords, etc in the configs.

Having said this, if Ascend want you to Re-build the box, they want you to
blow away the config, & build it from scratch.  They do not want you putting
an old config back in the box.

If the fault is staying with the slot, it sounds like you need to RMA the
box.

When a MAX is defaulted, the Term Server is disabled.  To use it, you need
to enable it under   ETHERNET>MOD CONF> TSERV

Ashley Pickering
asnet Australia Pty Limited

----- Original Message -----
From: Henry Smith, Jr <hensj@ihs2000.com>
To: <ascend-users@bungi.com>
Sent: Monday, 11 October 1999 19:36


> Ok..After my last post praising 7.2.3 I do have one problem that
> is(partially) unrelated.
>
> 00-000 System
> 10-000 Net/T1
> 20-000 Net/T1
> 30-000 K56 Modem-16
> 40-000 K56 Modem-16
> 50-000 Not Avail     <------
> 60-000 K56 Modem-16
> 70-000 K56 Modem-16
> 80-000 K56 Modem-16
>
> I have switched modems.. and the problems stays with the port,  and
> does not follow the modem.
>
> I fclear, fsave, nv and nothing
>
> I powered off the unit and pulled the PRI's and then rebooted,
> waiting for the modems to pass POST and then reconnected the PRI's.
> Still nothing
>
> My next step (as specified by ascend) is to totally clear the config
> and reinstall.
>
> The reason I know this is unrelated is because I had the problem once
> before prior to the update and pulling the pri in combo with clearing
> and re-saving the flash brought the port back.
>
> I have a backup file and am about to clear the unit of config.
>
> I remember recently doing something similar on an ascend pipeline.
> When I did this I simply copy and pasted the config's into a window
> and rebooted the pipeline instead of manually entering the config's.
>
> I can't remember the steps though.  I though it was in TermServ, but
> (this is why I said 'partially' in the first sentence of this post)
> but nothing happens when I choose termserv.  It just goes back to the
> main menu (not the DO but the main).  Is this the correct place I
> should go or am I doing something wrong?  Furthermore if I am able to
> get into the Termserv what are the steps needed to do this procedure?
>
> Thank you,
>
> - Henry Smith, Jr.
> - Systems Administrator
>
> Making a difference one customer at a time....
>
>
> IHS2000 Internet Services
> 11 Brookfield Dr
> Lebanon, Pennsylvania 17046
>
> Phone  (717) 274-3300
> Phone  (717) 520-0505
> Fax  (717) 306-1112
> http://www.ihs2000.com
> EMail  hensj@ihs2000.com
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd: <http://www.nealis.net/ascend/faq>
>


++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>