(ASCEND) OSPF troubles

["Edwin Ringersma" <edwin@introweb.nl>]

Hello,

It seems that some routes don't get passed to other ospf router.
I've configured a Cisco3620 and 2 max6000 to use ospf.
They use simple authentication because md5 doesn't work. (I don't 
have a clue why but that's not the biggest problem).
Here is some information from the 3620 (Hengelo).
Hengelo>sho ip ospf neighbor

Neighbor ID     Pri   State           Dead Time   Address         
Interface
195.86.14.68      5   FULL/DROTHER    00:00:32    195.86.14.68    
FastEthernet1/
0
195.86.14.76      5   FULL/BDR        00:00:33    195.86.14.76    
FastEthernet1/
0
Hengelo>sho ip ospf int fastethernet 1/0
FastEthernet1/0 is up, line protocol is up
  Internet Address 195.86.14.69/25, Area 0.0.0.0
  Process ID 10, Router ID 195.86.51.149, Network Type 
BROADCAST, Cost: 1
  Transmit Delay is 1 sec, State DR, Priority 2
  Designated Router (ID) 195.86.51.149, Interface address 
195.86.14.69
  Backup Designated router (ID) 195.86.14.76, Interface address 
195.86.14.76
  Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 
5
    Hello due in 00:00:02
  Neighbor Count is 2, Adjacent neighbor count is 2
    Adjacent with neighbor 195.86.14.68
    Adjacent with neighbor 195.86.14.76  (Backup Designated 
Router)
  Suppress hello for 0 neighbor(s)
Hengelo>

On the max I can see this:
ascend% sho ospf rtab
DTyp RType Destination        Area            Cost  Flags   Next hop(s)  
   IfNu
m
RTE  FIX   0.0.0.0/0          -               1     0x100   195.86.14.69    
197
RTE  FIX   195.86.14.192/27   -               1     0x1     0.0.0.197       
197
RTE  OSPF  195.86.14.0/25     0.0.0.0         1     0x1     0.0.0.0        
 0
RTE  NONE  195.86.14.0/24     -               0     0x2     None            -
1
RTE  OSPF  195.86.14.76/32    0.0.0.0         0     0x1     0.0.0.197   
    197
RTE  OSPF  195.86.14.68/32    0.0.0.0         1     0x201   
195.86.14.68    0
RTE  FIX   195.86.99.209/32   -               2     0x81    0.0.0.197       
197
RTE  FIX   195.86.14.163/32   -               2     0x81    0.0.0.197       
197

The ip-adres I'm particularly interested in getting to the other routers 
is 195.86.99.209 in this example.
Does anybody have a clue what may cause the problem ?
Configuration is as suggested in: 
http://aos.ascend.com/aos:/gennavviewer.html?doc_id=0900253d800
069e0&doc_header=terminal

Met vriendelijke groeten,

Edwin Ringersma

--------------------------------------------------------
   IntroWeb                Postbus 724 7550 AS Hengelo
   Tel: 074 - 243 01 05    Welbergweg 30
   Fax: 074 - 242 98 95    7556 PE Hengelo
   http://www.introweb.nl                       
--------------------------------------------------------
  Internet Access & Zakelijke Internet Toepassingen
--------------------------------------------------------
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>