Re: [RE: (ASCEND) ISDN Connections to Max 4004]

[Maverick <maverickthegreat@netscape.net>]

Here is the Radius accounting info


	Acct-Status-Type = Stop
	Acct-Delay-Time = 0
	Acct-Session-Id = "275059963"
	Ascend-Disconnect-Cause = 41 <-----------------

LCP negotiation failed b/c user is sending password via PAP and remote
unit is configured for CHAP (or vice-versA)


	Ascend-Connect-Progress = 77
	Ascend-Data-Rate = 64000
	Ascend-PreSession-Time = 1
	Ascend-Pre-Input-Octets = 214389
	Ascend-Pre-Output-Octets = 4752510
	Ascend-Pre-Input-Packets = 8322
	Ascend-Pre-Output-Packets = 9347
	Caller-Id = "2484891487"
	NAS-Port-DNIS = "4305"

Thanks for your help

Dan Meyer


-----Original Message-----
From: Mitchell Arnone [mailto:mitchell.arnone@occ.treas.gov]
Sent: Wednesday, May 19, 1999 11:48 AM
To: owner-ascend-users@max.bungi.com; ascend-users@max.bungi.com
Subject: RE: (ASCEND) ISDN Connections to Max 4004


In my experience, the ISDN disconnect code is different from the Ascend 
disconnect cause.  For instance, on a Pipeline, you can go into terminal

mode and do a "show ISDN" and a history of ISDN disconnect causes will
be 
listed.  However, there are no associated progress codes.  In one of the

pipeline manuals is a list of ISDN cause codes with explanation.

On the MAX, you should see disconnect cause code and a progress code 
associated with each disconnect.  The disconnect cause indicates the 
symptom that triggered the MAX to initiate a disonnect and the progress 
code indicates how much progress was made in the session before the 
disconnect occurred.

Mitch
-------------
Original Text
From: "Dan Meyer" <DMeyer@corp.realcomp.com>, on 5/19/99 9:28 AM:
To: SMTP@DC2@OCC[<ascend-users@max.bungi.com>], Mitchell Arnone@Net 
Services@ITS

I was not watching on the Max the last time we tried, I will next time
to watch for a cause code. They are using a Cisco 760 or 770 ISDN
router.

BTW, Isn't the Ascend-Disconnect-Cause the same as the ISDN disconnect
cause?

Thanks

-----Original Message-----
From: Mitchell Arnone [mailto:mitchell.arnone@occ.treas.gov]
Sent: Wednesday, May 19, 1999 6:55 AM
To: owner-ascend-users@max.bungi.com; ascend-users@max.bungi.com
Subject: re: (ASCEND) ISDN Connections to Max 4004


Is there a cause code being reported on the MAX when the session fails
to 
come all the way up.  Which ISDN TA are you using.  If it is a pipeline,

what does it show for the ISDN disconnect cause?

Mitch
-------------
Original Text
From: "Dan Meyer" <DMeyer@corp.realcomp.com>, on 5/18/99 3:12 PM:
To: SMTP@DC2@OCC[<ascend-users@max.bungi.com>]

I am trying to configure ISDN connections to an Ascend 4004. I have
configured the PRI and am able to connect on that circuit using an
analog modem. When I try to connect from an ISDN terminal adapter the
connection starts to come up, then gets dropped.

I get the following from Radius accounting.

Mon May 17 14:18:07 1999
	NAS-IP-Address = 207.49.236.26
	NAS-Port = 20102
	NAS-Port-Type = Async
	Acct-Status-Type = Stop
	Acct-Delay-Time = 0
	Acct-Session-Id = "275059490"
	Ascend-Disconnect-Cause = 185
	Ascend-Connect-Progress = 31
	Ascend-Data-Rate = 0
	Ascend-PreSession-Time = 34
	Ascend-Pre-Input-Octets = 0
	Ascend-Pre-Output-Octets = 0
	Ascend-Pre-Input-Packets = 0
	Ascend-Pre-Output-Packets = 0
	Caller-Id = "2482031391"
	NAS-Port-DNIS = "4305"

Is there something I am missing in the configuration?


Dan Meyer
IT Operations Manager
Realcomp II Ltd
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>


____________________________________________________________________
Get your own FREE, personal Netscape WebMail account today at http://webmail.netscape.com.
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>