Re: (ASCEND) Question about Multi IP addr NAT

[Melissa Meister <super_mel@mindspring.com>]

nelson,

first, the P75 should be configured for "single IP addr" rather than
multi - that might fix your problem

also, are all the computers on the same subnet?  that might cause a
problem as well.

the P75 can act as a DHCP server - but I wouldn't recommend it.

hope that helps!

Melissa Meister

"Llabona, Nelson" wrote:
> 
> Group,
> 
> I have set up the MAX with a connection profile for a pipeline75.
> It connects and can get everywhere, as can the first PC on the hub behind the
> P75.
> When the second PC on the hub powers up, it has no connectivity to the MAX and
> beyond.
> 
> First PC continues to work flawlessly while second PC cannot get past the P75.
> Max is running 7.0.4 and P75 is running 6.0.6 load b2.p75.
> 
> P75 is configured with NAT:
>         ->Routing =yes
>         ->Lan = Multi IP addr
> 
> And MAX connection profile is set up DHCP Options :
>         ->Reply Enables = Yes
>         ->Pool Number = 0
>         ->Max Leases = 3
> 
> Also what DHCP / NAT debug commands can I do on a P75 ???
> 
> Sincerely,
> Nelson Llabona
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd:   <http://www.nealis.net/ascend/faq>

-- 
Melissa
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>