Re: [(ASCEND) Question about Multi IP addr NAT]

[Maverick <maverickthegreat@netscape.net>]

Nelson,

I have always used "single IP address" on the pipeline 
for NAT configuration and it has worked for me.

P75 is configured with NAT:
	->Routing =yes
	->Lan = Single IP addr

Any reason why you are using multi-IP address for NAT config.



"Llabona, Nelson" <nllabona@harris.com> wrote:
Group,

I have set up the MAX with a connection profile for a pipeline75.
It connects and can get everywhere, as can the first PC on the hub behind the
P75.
When the second PC on the hub powers up, it has no connectivity to the MAX and
beyond.

First PC continues to work flawlessly while second PC cannot get past the P75.
Max is running 7.0.4 and P75 is running 6.0.6 load b2.p75.

P75 is configured with NAT:
	->Routing =yes
	->Lan = Multi IP addr

And MAX connection profile is set up DHCP Options :
	->Reply Enables = Yes
	->Pool Number = 0
	->Max Leases = 3

Also what DHCP / NAT debug commands can I do on a P75 ???

Sincerely,
Nelson Llabona
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>


____________________________________________________________________
Get your own FREE, personal Netscape WebMail account today at http://webmail.netscape.com.
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>