(ASCEND) Re: Ascend Max to Pipe NAT question

[Daniel <daniel@lynx.net>]

Yes, I have set the remote IP address on the P50 as the Max4k's IP address
and also the remote name as well. I will try to capture the hex code to see
what is going on.

Thanks.

Any more suggestion as where to look into ?

Daniel


At 09:07 AM 6/22/99 PDT, you wrote:
>Hi, I saw your posting on the Ascend mailing list. I think that for PPP 
>negotiation to work you need to set the Pipeline's remote IP address under 
>the config menu to that of the max's. I ran into this before. Make sure that 
>the remote name on the Pipe is set to the system name of the max also. What 
>you may want to do though is to go into diagnostics mode (hit the F1 key, 
>then d for diagnostics) and do a
>>wandisplay 64
>- then bring up the call from the max end and you will see hexadecimal 
>output. Capture the trace with your telnet program or terminal emulation. 
>Then email it to suppport@ascend.com and ask them to decode the trace to 
>determine exactly where the PPP negotiation is failing.
>
>
>
>_______________________________________________________________
>Get Free Email and Do More On The Web. Visit http://www.msn.com
>
>
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>