(ASCEND) Re: ascend-users-digest V96 #1643

[zhanghao <zhangh@asiainfo.com>]

please do not send this mail in future.thanks


owner-ascend-users-digest@max.bungi.com wrote:

> ascend-users-digest        Saturday, 19 June 1999       Volume 96 : Number 1643
>
> In this issue:
>
> (ASCEND) MAX 4000 and 100MB EtherNet
> (ASCEND) Message #214. Cannot save profile. No space in NVRAM
> Re: (ASCEND) MAX 4000 and 100MB EtherNet
>
> ----------------------------------------------------------------------
>
> From: "Tim Syratt" <tim@elite.net.au>
> Date: Sun, 20 Jun 1999 04:03:58 +1000
> Subject: (ASCEND) MAX 4000 and 100MB EtherNet
>
> Is it possable to buy an adaptor so that the MAX 4000 model can run at
> 100MBs Full Duplex on an EtherNet?
>
> We currently have it running only at 10MB Half Duplex with 56K modems,
> however I would like to upgrade it to 100MB to reduce any network lag
> between the max, proxy and name servers.
> Any Suggetions would be much appreciated.
>
> Thankyou in anticipation.
>
> Regards,
> Tim Syratt
> Systems Administrator
> EliteNET Pty Ltd
> http://www.elite.net.au
> http://irc.elite.net.au
> 0419 322 883
>
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd:   <http://www.nealis.net/ascend/faq>
>
> ------------------------------
>
> From: Ilia Kuliev <kuliev@aist.com>
> Date: Sat, 19 Jun 1999 20:48:01 +0200
> Subject: (ASCEND) Message #214. Cannot save profile. No space in NVRAM
>
> Hello.
>
> What was fixed in the firmware 7.0.4 for DSLPipe? I'm asking because when I
> tried to make some changes in DSLPipe profile (firmware 6.0.0) after "Exit
> and accept" I've got a message "Message #214. Cannot save profile. No space
> in NVRAM". Thanks God, it's still working with the old profile... So, how is
> possible to fix it?
>
> Sincerely yours,
>           Ilia
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd:   <http://www.nealis.net/ascend/faq>
>
> ------------------------------
>
> From: Jason Nealis <nealis@rcn.com>
> Date: Sat, 19 Jun 1999 14:36:47 -0400
> Subject: Re: (ASCEND) MAX 4000 and 100MB EtherNet
>
> Nope I don't think this is possible, the chip-set that resides within the
> MaX is already at the max of 10M half.
>
> You could buy a 6000 which run's at 100M Full Duplex.
>
> Jason Nealis
> RCN
>
> On Sun, Jun 20, 1999 at 04:03:58AM +1000, Tim Syratt stated
> > Is it possable to buy an adaptor so that the MAX 4000 model can run at
> > 100MBs Full Duplex on an EtherNet?
> >
> > We currently have it running only at 10MB Half Duplex with 56K modems,
> > however I would like to upgrade it to 100MB to reduce any network lag
> > between the max, proxy and name servers.
> > Any Suggetions would be much appreciated.
> >
> > Thankyou in anticipation.
> >
> > Regards,
> > Tim Syratt
> > Systems Administrator
> > EliteNET Pty Ltd
> > http://www.elite.net.au
> > http://irc.elite.net.au
> > 0419 322 883
> >
> > ++ Ascend Users Mailing List ++
> > To unsubscribe:       send unsubscribe to ascend-users-request@bungi.com
> > To get FAQ'd: <http://www.nealis.net/ascend/faq>
> >
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd:   <http://www.nealis.net/ascend/faq>
>
> ------------------------------
>
> End of ascend-users-digest V96 #1643
> ************************************
>
> ++ Ascend Users Mailing List Digest++
> To unsubscribe:
> "echo unsubscribe | mail ascend-users-digest-request@bungi.com"
> To get FAQ'd:   <http://www.shore.net/~dreaming/ascend-faq>
> or              <ftp://ftp.shore.net/members/dreaming/ascend-faq.txt>

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>