Re: (ASCEND) TNT 1.3Ap24 fails to authenticate ISDN via RADIUS

[Peter Lalor <plalor@infoasis.com>]

>At 11:35 AM 1/19/98 -0800, Matt Holdrege wrote:
>>At 10:22 AM 1/19/98 -0800, Peter Lalor wrote:
>>>Just upgraded our TNT from 1.3Ap20 to 1.3Ap24 and it gets a RADIUS timeout
>>>for ISDN users. Analog users continue to work fine, and downgrading to Ap20
>>>immediately fixes the problem.
>>>
>>>This sounds suspiciously like TR 2720: ISDN users could fail to connect due
>>>to erroneous RADIUS timeouts, which is explicitly listed as fixed in the
>>>1.3Ap24 release notes.
>>
>>Can you give some more info? How long had the TNT been up? Have you tried
>>debugging your Radius server? Any helpful debug messages?
>>
>>In our test lab, we've run 672 HDLC calls with Radius Auth and seen no
>>timeouts.
>
>The problem is not seen if the RADIUS server is accessible via the ethernet
>interface (hence Matt's observations). When the RADIUS server is over the FR
>interface, we have been able to reproduce this. Peter, is this how you are
>configured?

Yes!

Peter Lalor
Infoasis
plalor@infoasis.com
http://www.infoasis.com/
415-459-7991 x102
415-459-7992 fax


++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>

---

References:

• Re: (ASCEND) TNT 1.3Ap24 fails to authenticate ISDN via RADIUS
• From: Matt Holdrege <matt@ascend.com>
• (ASCEND) TNT 1.3Ap24 fails to authenticate ISDN via RADIUS
• From: Peter Lalor <plalor@infoasis.com>
• Re: (ASCEND) TNT 1.3Ap24 fails to authenticate ISDN via RADIUS
• From: "Kevin A. Smith" <kevin@ascend.com>

---

• Prev by Date: (ASCEND) Routing calls to slots
• Next by Date: Re: (ASCEND) Rockwell and V.PCM
• Prev by thread: Re: (ASCEND) TNT 1.3Ap24 fails to authenticate ISDN via RADIUS
• Next by thread: Re: (ASCEND) TNT 1.3Ap24 fails to authenticate ISDN via RADIUS
• Index(es):
  • Main
  • Thread