Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ASCEND) 5.0Ap42 for MAX products




I have discovered the following problem in 5.0Ap38 running on a MAX 1800.

Has anyone else noticed this?  It tried to report this the last time I had
a ticket opened with Ascend, but nobody ever called me back to get my
details.

**** Here is my radius entry

rivrisdn        Password = "UNIX"
        Ascend-Idle-Limit = 600,
        Framed-Route = "206.145.56.32/28 0.0.0.0 1"


***** This is with 5.0Ap36
>sh ip route

Destination        Gateway         IF       Flg   Pref Met     Use     Age
206.145.48.94/32   206.145.48.94   wan12    rT     100   1       0   16383
206.145.56.32/28   206.145.48.94   wan12    rGT    100   1   47575   16383


***** This is with 5.0Ap38
>sh ip route

Destination        Gateway         IF       Flg   Pref Met     Use     Age
206.145.48.85/32   206.145.48.85   wan54    rT     100   1       5    3211
206.145.56.32/28   206.145.48.85   ie0      rGT    100   1      12    3211


Notice how the subnet route under p38 shows up as going back out the
Ethernet...that sucks...

Kevin:  Do you know if this is fixed in 5.0Ap42 ???

Dale

-------------------------------------------------
Dale Henninger                   817 Vandalia St.
pcOnline Internet Services     St. Paul, MN 55114
612/647-6774 Voice               612/647-5956 Fax 
daleh@pconline.com        http://www.pconline.com

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>


References: