Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ASCEND) MAX 4048 + 5.0Ap38 oddity

I went from 5.0Ap5 to 5.0Ap36 and then 38. The problem was in p36, I am
almost certain.

At 01:32 PM 1/14/98 -0800, Kevin A. Smith wrote:
>Do we know for sure the last version which did NOT see this problem?
>
>I can then find out which changes may be related.
>
>Has anyone talked to Ascend Support about this?
>
>At 09:26 AM 1/13/98 -0600, ascend@digistar.com wrote:
>>
>>I've noticed something that's never happened with any other release...
>>
>>Resetting a MAX 4xxx with 5.0Ap38 causes the MAX to play havoc with the
>>remote telco switch if the CT1s are ESF/B8ZS.
>>
>>I can't remember the dozens of times I've reset a max with ESF/B8ZS lines
>>attached to it and seen the connections come right back up, however now... 
>>when I reset a max loaded with 5.0Ap38 most of the channels do not come
>>back up and the switch throws half of the channels into "maintenance busy" 
>>mode, requiring me to call the telco and have them manually reset the
>>channels.  I'm wondering if the max goes into "factory" mode for a few
>>seconds (D4/AMI) before reading its internal configuration and then
>>returning to ESF/B8ZS, thus causing the switch to go into alarm... 
>>
>>
>>--
>>        
>>      /
>>  /  o     Jason Buchanan
>> o         Digistar Microsystems
>>       /   jsb@digistar.com
>>      o    http://www.digistar.com/
>>
>>++ Ascend Users Mailing List ++
>>To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
>>To get FAQ'd:	<http://www.nealis.net/ascend/faq>
>>
>
>Kevin
>
>
>++ Ascend Users Mailing List ++
>To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd:	<http://www.nealis.net/ascend/faq>
>
>

/------------------------------------------------------------------------\
| Michael Hyman                              Quickturn Design Systems    |
| Manager, Information Technology Group      55 West Trimble Road        |
| mhyman@quickturn.com                       San Jose, Ca. 95131         |
| (408) 914-6409 Voice                       (408) 914-6909 Fax          |
|                                                                        |
| "Out the 10Base-T, through the router, off the bridge, over the leased |
|       line, past the firewall, down the T1...nothing but Net."         |
\------------------------------------------------------------------------/
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>
References: