Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ASCEND) 6.0b2 for the MAX Family

The only T1 K56 load that's there is tik.m40 which is an empty file.

At 02:44 PM 1/14/98 -0800, Kevin A. Smith wrote:
>The 6.0b2 beta release for the MAX family is now available to registered
>users on www.ascend.com.  
>
>[Register at: http://www.ascend.com/1916.html]
>
>You will see a link to the Beta Agreement
>Form from your logon confirmation screen.  The agreement starts at:
>
>http://www.ascend.com/private/beta
>
>If the user accepts the agreement they are taken to an index page with
>links to all of the available images.
>
>The 6.0b2 beta release for the MAX products contains the following new
>features and corrections:
>
>Note: This release contains 1.160t of the Rockwell modem code.
>
>
>New features in 6.0b2:
>
>* ATMP inactivity timer
>* SNMP sysConfigTftpStatus object reports more states
>
>
>
>Corrections in 6.0b2
>
>TR 1647   MAX BRI slot card B channel stays in the “r” state with 
>          Switch Type=Japan. 	
>TR 2242   MAX 1800 were resetting with an FE19. 
>TR 2245   The MAX did not recognize Telnet-Break on V.34 and 
>          K56flex calls. 	
>TR 2309   TCP statistics for TCP-Clear calls were not being 
>          generated 
>TR 2398   MAX reset—FE2—5.0Ap34. 	
>TR 2446   MAX4000 with PHS did not reject voice incoming call via PRI 
>TR 2804   MAX resets with FE 2 and Warning 175 after a few days. 
>TR 2843   TCP-Clear options not working in Connection profile 
>TR 2874   MAX did not callback user if CBCP Mode=User Num  and 
>          Use Trunk Grps=No 
>TR 2902   Increase immediate Telnet and Rlogin performance and 
>          maximum # of sessions 
>TR 2931   MAX 1800 reset with fatal error 8 
>TR 2939   Multicast routes in routing table caused HP Openview
>          to display incorrect MAX icon 	
>TR 2954   MAX sent CBCP callback request to non-CBCP users 
>TR 2889   MAX did not add addresses assigned to CBCP users to 
>          its routing table 	 
>TR 3000   Some MAX loads too large for flash memory 
>TR 250103 Frame relay fragmentation did not work with ATMP. 	
>
>-- Patti
>
>
>
>
>Kevin
>
>
>++ Ascend Users Mailing List ++
>To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd:	<http://www.nealis.net/ascend/faq>
>
>
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>
References: