Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: (ASCEND) Pipeline 15 with Max4004 (ammended)
At 09:48 AM 1/9/98 -0500, you wrote:
>Daniel,
>
>you can try using hyperterminal after hanging up on a 56k call and do an
>at&v,
>are the s registers what you expect them to be ?
>i.e. s68 = 64
I tried all that. the at&v show a lot of S registers but not S68. There is
no S68 on the list.
>if not you might want to enter the at commands from hyperterminal and
>then do
>a at&w and at&w0 to save the configs.
I have done it lots of time even on 3 different units (brand new).
>Also in you RADIUS server for that user try adding the following :
>Ascend-Data-Svc = 2
I have not tried this.
Thanks
Daniel
Lynx Internet
>These are my best guesses. Please let me know what the ulimate fix
>was.....
>
>Good Luck,
>Sincerely,
>Nelson Llabona
>
>
>
>> -----Original Message-----
>> From: Daniel [SMTP:daniel@lynx.bc.ca]
>> Sent: Thursday, January 08, 1998 5:02 PM
>> To: ascend-users@bungi.com
>> Subject: (ASCEND) Pipeline 15 with Max4004 (ammended)
>>
>> Hi folks,
>>
>> I have clients using win95 DUN and pipeline 15 1.0 trying to connect
>> to our
>> Max4004 (5.0Ai13). It connects fine but it only connects at 56K as
>> indicated on our Max. We have tried to configured the pipeline by
>> puting
>> "S68=64" and "%A4=0" in the "Extra Setting" of DUN but it did not
>> help. I
>> then use "hyper terminal" to dial in to our Max and I see it connect
>> and
>> "Carrier 64000". It seems that it is connected at 64K but the Max
>> shows
>> only 56K (both Xmit-Rate and Data-Rate). Is it really connect at 64K
>> or
>> 56K? Pipeline 75 and other ISDN modem are fine.
>> I tried it on three pipeline 15 and they give me the same results.
>>
>> Any ideas ?
>>
>> Daniel
>> Lynx Internet
>>
>> ++ Ascend Users Mailing List ++
>> To unsubscribe: send unsubscribe to
>> ascend-users-request@bungi.com
>> To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups: