Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: (ASCEND) Pipeline 15 with Max4004 (ammended)
FYI
Here in Pac Bell land, you need to dial a 10-digital phone number if the
call is between two COs in the same area code in order to use 64K.
Otherwise,
you get a 56K connection.
Steve.
> -----Original Message-----
> From: Jim Howard [SMTP:jhoward@lyceum.com]
> Sent: Thursday, January 08, 1998 9:53 PM
> To: ascend-users@bungi.com
> Subject: Re: (ASCEND) Pipeline 15 with Max4004 (ammended)
>
> At 17:01 1998/01/08 -0800, Daniel wrote:
> >"Carrier 64000". It seems that it is connected at 64K but the Max
> shows
> >only 56K (both Xmit-Rate and Data-Rate). Is it really connect at 64K
> or
>
> are you using a PPP or v.120 connection?
> what speed if your serial port running? (57.6/112k)
> do you have your max setup to log to a syslog server?
> if so look at the logs there, that should give you
> the real connection rate (i don't always trust a "show user")
>
> -Jim H
> ----
> Jim Howard Sr Network Engineer Lyceum Internet
> jhoward@lyceum.com http://www.lyceum.com/ 404.248.1733
>
> My PGP Public Key: http://www.lyceum.com/~jhoward/pgp-key.txt
> Fingerprint: 7E8B E2BA 1314 2535 CB08 CFF9 119B 7CD3 2488 954D
>
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to
> ascend-users-request@bungi.com
> To get FAQ'd: <http://www.nealis.net/ascend/faq>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>