Re: (ASCEND) Data over Voice

[Jason Nealis <nealis@rcn.com>]

To implement DOV on the Max with you will need a MSN# (Multiple Subscriber #) mapped to your original
trunk group. Basically it's a different phone number that hits your same hunt group. 

Once you have that set up and working you then plug that number in on the max in the following 
area :

Ethernet -->Mod Config --> WAN options... -->Ans 1#=XXXX

This will route any incoming call that matches XXXX to a HDLC. 

For instance on a hunt group of mine I have a MSN# mapped to the original hunt, The
MSN# is XXX-XXX-0062

So I have the following setup :

Ethernet -->Mod Config --> WAN options... -->Ans 1#=0062


So now when any user dials XXX-XXX-0062 he gets a HDLC digital tone no matter what the call
type is flagged as (analog/digital) 

--                                                                                                                                        
Jason Nealis                                                                                                                              
Director of Internet Operations                                                                                                           
RCN                                                                                                                                       
                    


On Wed, Aug 25, 1999 at 05:15:49PM -0400, Troy Settle stated
> 
> Ok, I got a couple responses to this.
> 
> The first reccomended pulling the modems out of a NAS.  No problem, except
> that it's rather stupid to split your diaup pools like that, as your
> cost/user goes down as you increase the user/port ratio.  Economies of scale
> insist that the bigger the dialup pool, the cheaper it is to provide service
> to a single user.
> 
> The second option (quoted below) allows for straight DATA or DoV, but not
> both.  We need both, as not all of our ISDN users will be capable or willing
> to use DoV.
> 
> With that said, I ask again if anyone knows where in the configuration I set
> up call routing based on Called-Station-Id.
> 
> Thanks again,
> 
> Troy
> 
> 
> > -----Original Message-----
> > From: owner-ascend-users@max.bungi.com
> > [mailto:owner-ascend-users@max.bungi.com]On Behalf Of Steve Rothanburg
> > Sent: Wednesday, August 25, 1999 11:49 AM
> > To: Ascend Users
> > Subject: Re: (ASCEND) Data over Voice
> >
> >
> > I think all we do is set the call type to voice instead of 56k or 64k.
> >
> > Troy Settle wrote:
> >
> > > Hey all,
> > >
> > > Quite some time back, I saw some information on how to do DoV,
> > and remember
> > > that it had to do with having different dialin numbers and call
> > routing or
> > > something.  Well, at the time, BA told us that they couldn't give us
> > > multiple numbers for our dialin lines.
> > >
> > > Now the story has changed.  We're getting a second number soon, and I'm
> > > wondering what all needs to be done to implement DoV on our
> > Maxen (40xx and
> > > 60xx).
> >
> > ++ Ascend Users Mailing List ++
> > To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
> > To get FAQ'd:	<http://www.nealis.net/ascend/faq>
> >
> 
> ++ Ascend Users Mailing List ++
> To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd:	<http://www.nealis.net/ascend/faq>
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>