RE: (ASCEND) multishelf TNT

["Zanten, Marco van" <Marco.Zanten@Alcatel.nl>]

Indur,

The card location does not matter much to my opinion.

Set the master shelf to master in the system profile
set the slave shelf to slave in the system profile
and set the rotary switch of the slave to 2
connect them up using the appropriate cables (I think a FTP cable
straight is to be used)
note that port 1 of the taxibus on the master needs to be connected to
port 2 of the slave and vise versa.

reset -a and your done.

Good luck

Marco van Zanten

> -----Original Message-----
> From:	Jason Nealis [SMTP:nealis@rcn.com]
> Sent:	vrijdag 20 augustus 1999 0:19
> To:	Indur Ait
> Cc:	ascend-users@bungi.com
> Subject:	Re: (ASCEND) multishelf TNT
> 
> 
> Traditionally what I did prior to the high-density CSM3 modem cards
> came out was
> to put all my T1 cards and HDLC/ENET cards in the to the master shelf
> and
> make the slave shelf just a big modem box. It worked well in our
> environment. 
> 
> --
> 
> Jason Nealis
> 
> Director of Internet Operations
> 
> RCN        
> 
> On Wed, Aug 18, 1999 at 04:12:22PM +0300, Indur Ait stated
> > I have two working TNT's and now I have to stack they together.
> First
> > TNT has 8xE1 card and modems, and second TNT has 8xE1 card and
> modems.
> > Should I put all E1 cards to first, master TNT?
> > Can someone give me some hints, how configure multishelf TNT?
> > 
> > 
> > Indur Ait
> > Estonian Telephone Company
> > 
> > ++ Ascend Users Mailing List ++
> > To unsubscribe:	send unsubscribe to
> ascend-users-request@bungi.com
> > To get FAQ'd:	<http://www.nealis.net/ascend/faq>
> > 
> 
> ++ Ascend Users Mailing List ++
> To unsubscribe:	send unsubscribe to
> ascend-users-request@bungi.com
> To get FAQ'd:	<http://www.nealis.net/ascend/faq>
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>