Re: (ASCEND) Router for ADSL

[Winfried Haug <haug@seicom.net>]

> I've been bustin' a gut trying to get the Ascend DSLTNT to work with their
> Pipe75 on DMT.  I get a connection running for about 10 minutes and then
> the whole circuit collapses and won't re-establish.  From the looks of the
> commands, it will be a mega-machine - but right now there is no code
> behind some of the features they offer.  Their CAP over Frame Relay worked
> for awhile - almost, there was a serious hum on the line which we knocked
> back, but not out, by using a single wire in CAT5 cabling for all of the
> cross-connects (can you say EMI?).  The data connections were flying; my
> beta users are having serious withdrawals while we do the conversion to
> DMT.  Maybe the next rev...

We had many problems to establish a DSl connection with the DSL Pipelines:

- up to 10 minutes to establish a connection
- many CRC errors on the link
- no parameters to change to link speed etc..

we now use Telindus Crocus equipment on the same (!) circuits without any
problems (http://www.telindus.com/products/telindus.phtml).
They support IP and Frame-Relay with X21 or 10BaseT Interface

The only Ascend DSL Equipment we use are the IDSL-PIPE50 with a IDSL card
in a TNT/MAX4000




-- 

Winfried Haug        * Geschaeftsfuehrer * eMail: wh@seicom.net
Laiblinsplatz 12     * 72793 Pfullingen  * tel. +49 7121 9770 0 
Hauptstaetterstr. 66 * 70178 Stuttgart   * fax. +49 7121 9770 19

------->> seicom.NET - making information available <<-------

    Internet access, network&security consulting and firewalls
     34 Mbit USA (Teleglobe) * 100 Mbit DE-CIX * 34 Mbit WIN 
                      
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>