Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Load for E1 with Modem outdial?
Elmar,
The special 'o' load is not required for modem outdial in 6.0.x
<snip>
Note: Special Modem outdial loads without R2 signaling (E1 m40 loads) are
no longer necessary because the MAX modem code now allows them to coexist.
These loads were designated with an "o" in the file name.
Peter
At 09:53 PM 4/27/98 +0200, Elmar Haag wrote:
>
>Until now, I used the image "ebok.m40" on my MAX 4000 with E1 and
>K56flex-Cards. This worked well, also with Callback over Modems.
>
>Now I want to upgrade to 6.0.4 but I am missing the apropriate load image.
>Although it is described in the pub/Software-Releases/Max/Current/README
>that there should be images with an "o" in the filename (for "supporting
>Modem outdial") not one single fielname contains an "o".
>I tried in Release 5.0AI28 the eik.m40 (without "o") and callback did not
>work, so I suppose if I use in 6.0.4 an image without an "o" the same
>thing happens.
>
>Ascend, where's the "o" gone?
>
>Elmar
>
>----------------------------------------------------------------------
>Elmar Haag CENTAUR COMMUNICATION Urbanstrasse 68
>haag@centaur.de Xlink PoP Heilbronn 74074 Heilbronn
>http://www.centaur.de Tel +49 7131 799 0 Fax +49 7131 799 260
>
>
>
>++ Ascend Users Mailing List ++
>To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
>
=========================================================================
Peter Watson ________
Senior Systems Engineer | /\ | Tel: +61-2-9255-7816
Ascend Communications Australia | /__\ | Fax: +61-2-9247-2417
Level 22, 259 George Street | // \\ | Mobile: +61-419-212-229
Sydney, NSW 2000 |/ \__/ \| Email: pwatson@ascend.com.au
Australia ASCEND URL: http://www.ascend.com.au
=========================================================================
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>