Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
(ASCEND) P75 NAT
I have one of the newer P75. This is what I want to do with NAT.
A PM3 (133.133.133.7) calls the P75 and assign a real static IP to the P75
(133.133.133.58). The P75 (ether is 192.67.22.253) is connected to a
private LAN (192.67.22.0).
I've tried all different settings, read the mailing lists, FAQs, but still
it's not working. I would like the use the Single IP method. Which
settings do I need to make this work? Anyone got a walk thru sheet?
I've gotten the P75 to report 133.133.133.58 to the PM3, but when that
happens, my whole network locks up.. no ping, nothing works.
I've also gotten 192.67.22.253 to report to the PM3 as the assigned IP for
the P75 (by mistake) and I can telnet to that address and ping to it. But
that is not what I want.
The next problem is there are 3 other subnets connected to 192.67.22.0
like so:
Internet
|
PM3
|
P75
|
|
--+-192.67.22.0---|~~~~~~~~
----192.67.23.0---| Novell 3.x box
----192.67.24.0---|
----192.67.25.0---|________
After getting the NAT to work with the PM3 and subnet 192.67.20.0, I would
like teh other subnets to be able to get out on the net too.. this sounds
impossbile without some nat on the novell3.x box too?
.............. ....................................
Thomas T. Thai Infomedia Interactive Communications
tom@iic.net TEL 612.376.9090 * FAX 612.376.9087
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>