Re: (ASCEND) Problem getting MRTG reading OIDs from DSLTNT cards ?

["Robert Hof" <rhof@NETinc.ca>]

Never mind - I can graph the frame relay interfaces, and actually get usable
data from them.  Thanks to all who responded.

Robert Hof
President, CEO
NETinc - The Internet People
http://www.netinc.ca/
----- Original Message -----
From: Robert Hof <rhof@NETinc.ca>
To: Ilker TEMIR (NAD) <ilker@marketweb.net.tr>
Cc: Ascend Mailing List <ascend-users@bungi.com>
Sent: Wednesday, April 28, 1999 10:29 AM
Subject: Re: (ASCEND) Problem getting MRTG reading OIDs from DSLTNT cards ?


| Could someone translate that into an mrtg query string for me? I'm also
| trying to get MRTG to look at SDSL ports, and the default gives me
nothing.
|
| Robert Hof
| President, CEO
| NETinc - The Internet People
| http://www.netinc.ca/
| ----- Original Message -----
| From: Ilker TEMIR (NAD) <ilker@marketweb.net.tr>
| To: Nicolas Scheibler <Nicolas.Scheibler@vite.net>
| Cc: <ascend-users@bungi.com>
| Sent: Monday, April 26, 1999 11:10 AM
| Subject: Re: (ASCEND) Problem getting MRTG reading OIDs from DSLTNT cards
?
|
|
| | Hello,
| |
| | It's strange, as I use same technique to get inoctets and
| | outoctets of several interfaces including IDSL and E1. Are you sure, you
| | are using the correct ifindex value ? Perhaps you can try
| | ip.ipRouteTable.ipRouteEntry.ipRouteIfIndex.x.y.z.w
| | to get ifindex. Here are my results for and IDSL port.
| |
| | kheops/#>snmpget xxxxxx public
| ip.ipRouteTable.ipRouteEntry.ipRouteIfIndex.x.y.z.128
| | ip.ipRouteTable.ipRouteEntry.ipRouteIfIndex.x.y.z.128 = 51
| | kheops/#>snmpget xxxxxx public interfaces.ifTable.ifEntry.ifInOctets.51
| | interfaces.ifTable.ifEntry.ifInOctets.51 = 233345
| |
| | By the way I using the version 7.0.1, it may be related to that. I
| | have had a similar problem with a different vendor, and solved problem
by
| | upgrading software.
| | Regards,
| |
| | Ilker TEMIR - MarketWeb
| |
| | > I'm trying to monitor the InOctets and OutOctets OIDs from my SDSL
| ports,
| | > but I'm not getting anything.
| | > If I walk through the MIB II form the TNT, I can see all my
interfaces:
| | >
| | > (lilu->)# snmpwalk x.x.x.x public 2.2.1.2
| | > interfaces.ifTable.ifEntry.ifDescr.1 = OCTET STRING: "Ethernet Slot
| 17/1"
| | > interfaces.ifTable.ifEntry.ifDescr.2 = OCTET STRING: "Serial WAN Slot
| 1/1"
| | > interfaces.ifTable.ifEntry.ifDescr.3 = OCTET STRING: "Serial WAN Slot
| 1/2"
| | > interfaces.ifTable.ifEntry.ifDescr.4 = OCTET STRING: "Serial WAN Slot
| 1/3"
| | > interfaces.ifTable.ifEntry.ifDescr.5 = OCTET STRING: "Serial WAN Slot
| 1/4"
| | > interfaces.ifTable.ifEntry.ifDescr.6 = OCTET STRING: "SDSL Slot 2/1"
| | > interfaces.ifTable.ifEntry.ifDescr.7 = OCTET STRING: "SDSL Slot 2/2"
| | > interfaces.ifTable.ifEntry.ifDescr.8 = OCTET STRING: "SDSL Slot 2/3"
| | > .... (cut) ....
| | >
| | > But If I keep looking at 2.2.1.10 (InOctets), all the counters are
| sticking
| | > to zero:
| | >
| | > (lilu->)# snmpwalk x.x.x.x public 2.2.1.10
| | > interfaces.ifTable.ifEntry.ifInOctets.1 = Counter: 1645980649
| | > interfaces.ifTable.ifEntry.ifInOctets.2 = Counter: 0
| | > interfaces.ifTable.ifEntry.ifInOctets.3 = Counter: 0
| | > interfaces.ifTable.ifEntry.ifInOctets.4 = Counter: 0
| | > interfaces.ifTable.ifEntry.ifInOctets.5 = Counter: 0
| | > interfaces.ifTable.ifEntry.ifInOctets.6 = Counter: 0
| | > interfaces.ifTable.ifEntry.ifInOctets.7 = Counter: 0
| | > interfaces.ifTable.ifEntry.ifInOctets.8 = Counter: 0
| | >
| | > Are these values located somewhere in the Enterprise section of the
MIB
| ?
| | > Does somebody have the OID I should use ?
| | >
| | > Thanks for any help.
| | >
| | > Nicolas Scheibler.
|
| ++ Ascend Users Mailing List ++
| To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
| To get FAQ'd: <http://www.nealis.net/ascend/faq>
|

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>