Re: (ASCEND) Problem getting MRTG reading OIDs from DSLTNT cards ?

["Robert Hof" <rhof@NETinc.ca>]

Could someone translate that into an mrtg query string for me? I'm also
trying to get MRTG to look at SDSL ports, and the default gives me nothing.

Robert Hof
President, CEO
NETinc - The Internet People
http://www.netinc.ca/
----- Original Message -----
From: Ilker TEMIR (NAD) <ilker@marketweb.net.tr>
To: Nicolas Scheibler <Nicolas.Scheibler@vite.net>
Cc: <ascend-users@bungi.com>
Sent: Monday, April 26, 1999 11:10 AM
Subject: Re: (ASCEND) Problem getting MRTG reading OIDs from DSLTNT cards ?


| Hello,
|
| It's strange, as I use same technique to get inoctets and
| outoctets of several interfaces including IDSL and E1. Are you sure, you
| are using the correct ifindex value ? Perhaps you can try
| ip.ipRouteTable.ipRouteEntry.ipRouteIfIndex.x.y.z.w
| to get ifindex. Here are my results for and IDSL port.
|
| kheops/#>snmpget xxxxxx public
ip.ipRouteTable.ipRouteEntry.ipRouteIfIndex.x.y.z.128
| ip.ipRouteTable.ipRouteEntry.ipRouteIfIndex.x.y.z.128 = 51
| kheops/#>snmpget xxxxxx public interfaces.ifTable.ifEntry.ifInOctets.51
| interfaces.ifTable.ifEntry.ifInOctets.51 = 233345
|
| By the way I using the version 7.0.1, it may be related to that. I
| have had a similar problem with a different vendor, and solved problem by
| upgrading software.
| Regards,
|
| Ilker TEMIR - MarketWeb
|
| > I'm trying to monitor the InOctets and OutOctets OIDs from my SDSL
ports,
| > but I'm not getting anything.
| > If I walk through the MIB II form the TNT, I can see all my interfaces:
| >
| > (lilu->)# snmpwalk x.x.x.x public 2.2.1.2
| > interfaces.ifTable.ifEntry.ifDescr.1 = OCTET STRING: "Ethernet Slot
17/1"
| > interfaces.ifTable.ifEntry.ifDescr.2 = OCTET STRING: "Serial WAN Slot
1/1"
| > interfaces.ifTable.ifEntry.ifDescr.3 = OCTET STRING: "Serial WAN Slot
1/2"
| > interfaces.ifTable.ifEntry.ifDescr.4 = OCTET STRING: "Serial WAN Slot
1/3"
| > interfaces.ifTable.ifEntry.ifDescr.5 = OCTET STRING: "Serial WAN Slot
1/4"
| > interfaces.ifTable.ifEntry.ifDescr.6 = OCTET STRING: "SDSL Slot 2/1"
| > interfaces.ifTable.ifEntry.ifDescr.7 = OCTET STRING: "SDSL Slot 2/2"
| > interfaces.ifTable.ifEntry.ifDescr.8 = OCTET STRING: "SDSL Slot 2/3"
| > .... (cut) ....
| >
| > But If I keep looking at 2.2.1.10 (InOctets), all the counters are
sticking
| > to zero:
| >
| > (lilu->)# snmpwalk x.x.x.x public 2.2.1.10
| > interfaces.ifTable.ifEntry.ifInOctets.1 = Counter: 1645980649
| > interfaces.ifTable.ifEntry.ifInOctets.2 = Counter: 0
| > interfaces.ifTable.ifEntry.ifInOctets.3 = Counter: 0
| > interfaces.ifTable.ifEntry.ifInOctets.4 = Counter: 0
| > interfaces.ifTable.ifEntry.ifInOctets.5 = Counter: 0
| > interfaces.ifTable.ifEntry.ifInOctets.6 = Counter: 0
| > interfaces.ifTable.ifEntry.ifInOctets.7 = Counter: 0
| > interfaces.ifTable.ifEntry.ifInOctets.8 = Counter: 0
| >
| > Are these values located somewhere in the Enterprise section of the MIB
?
| > Does somebody have the OID I should use ?
| >
| > Thanks for any help.
| >
| > Nicolas Scheibler.

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>