(ASCEND) Problem getting MRTG reading OIDs from DSLTNT cards ?

[Nicolas Scheibler <Nicolas.Scheibler@vite.net>]

I'm trying to monitor the InOctets and OutOctets OIDs from my SDSL ports,
but I'm not getting anything.
If I walk through the MIB II form the TNT, I can see all my interfaces:

(lilu->)# snmpwalk x.x.x.x public 2.2.1.2
interfaces.ifTable.ifEntry.ifDescr.1 = OCTET STRING: "Ethernet Slot 17/1"
interfaces.ifTable.ifEntry.ifDescr.2 = OCTET STRING: "Serial WAN Slot 1/1"
interfaces.ifTable.ifEntry.ifDescr.3 = OCTET STRING: "Serial WAN Slot 1/2"
interfaces.ifTable.ifEntry.ifDescr.4 = OCTET STRING: "Serial WAN Slot 1/3"
interfaces.ifTable.ifEntry.ifDescr.5 = OCTET STRING: "Serial WAN Slot 1/4"
interfaces.ifTable.ifEntry.ifDescr.6 = OCTET STRING: "SDSL Slot 2/1"
interfaces.ifTable.ifEntry.ifDescr.7 = OCTET STRING: "SDSL Slot 2/2"
interfaces.ifTable.ifEntry.ifDescr.8 = OCTET STRING: "SDSL Slot 2/3"
.... (cut) ....

But If I keep looking at 2.2.1.10 (InOctets), all the counters are sticking
to zero:

(lilu->)# snmpwalk x.x.x.x public 2.2.1.10
interfaces.ifTable.ifEntry.ifInOctets.1 = Counter: 1645980649
interfaces.ifTable.ifEntry.ifInOctets.2 = Counter: 0
interfaces.ifTable.ifEntry.ifInOctets.3 = Counter: 0
interfaces.ifTable.ifEntry.ifInOctets.4 = Counter: 0
interfaces.ifTable.ifEntry.ifInOctets.5 = Counter: 0
interfaces.ifTable.ifEntry.ifInOctets.6 = Counter: 0
interfaces.ifTable.ifEntry.ifInOctets.7 = Counter: 0
interfaces.ifTable.ifEntry.ifInOctets.8 = Counter: 0

Are these values located somewhere in the Enterprise section of the MIB ?
Does somebody have the OID I should use ?

Thanks for any help.

Nicolas Scheibler.
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>