Re: (ASCEND) Upgrade MAXTNT from 2.1.9 to 7.0.4, note on ethernet

[Andy Walden <andy@mtco.com>]

I rip those things out if they give me trouble :)



--
-----------------------------------------------------------------------
Andy Walden                        Work Email: andy@mtco.com.
Network Administrator, 		   Pers Email: andy@netimagination.com.
MTCO Communications		   Phone: (800) 859-6826
  " Reality is just Chaos with better lighting. "



On Thu, 15 Apr 1999, Keith Rice wrote:

> The part number and revision are on a sticker on the bottom of the card. 
> Let me tell you, it is NOT any fun getting that card back in.
> Not that getting it out was fun either. 
> I had to pull the next 2 cards below it out and line them up and push all 3
> in at once because it has a ridge on the bottom that likes to grab the card
> below.
> Hope this helps.
> 
> 
> At 09:29 AM 4/15/99 -0500, Michael Johnson wrote:
> >My question is regarding the MAX TNT 7.0.4 .pdf file, in the "Known issues
> >in this release" part where it says:
> >
> >. Use of this release is not recommended with Rev. B or lower of the
> >Ethernet-2 card
> >(TNT-SL-E10-100, part number 0800-0433-001). If you have a Rev. B or lower
> >Ethernet-2 card, contact your Ascend representative to obtain an upgrade to
> >Rev. C or
> >higher. The Rev. B or lower cards continue to work with releases earlier
> >than 7.0.0.
> >
> >How can I tell the revision of card I have installed?
> >
> >Don't tell me I have to pull a working/operation/functioning Ethernet card,
> >just to get its revision.
> >
> >
> >
> >
> >
> >
> >++ Ascend Users Mailing List ++
> >To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
> >To get FAQ'd:	<http://www.nealis.net/ascend/faq>
> 
> ++ Ascend Users Mailing List ++
> To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd:	<http://www.nealis.net/ascend/faq>
> 

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>