(ASCEND) ISDN BRI leased-lines

[Sascha Pollok <sp@iphh.de>]

Dear folks,

for the last 2 years I set up BRI leased-lines using a 8-Port-Bri-Card
in a Max and Pipelines on the other end.

Now I have to set up a leased-line with a Pipeline at the client's side
and a Cisco on my side. In case I use two transfer-networks on the
Cisco like this:

isdn leased-line BRI1/0

interface BRI1/0:1
 description I am the 1st B-Channel
 ip address xxx.xxx.79.249 255.255.255.252
 no ip directed-broadcast
 no ip route-cache
!         
interface BRI1/0:2
 description I am the 2nd B-Channel
 ip address xxx.xxx.79.253 255.255.255.252
 no ip directed-broadcast
 no ip route-cache


How do I tell a Pipe50 to deal with this?
Are there any other possibilities?

Thanks ia!

Regards,
 Sascha Pollok

--- 
 Sascha Pollok
 Technical Staff / Internet Port Hamburg
 Rödingsmarkt 14
 D-20459 Hamburg
 Germany
 Tel.    +49 (0)40 37 49 19-0
 Mobile  +49 (0)172 411 78 62
 Fax     +49 (0)40 37 49 19-29
 Email: sp@iphh.de
++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>