Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
(ASCEND) Link status '-' on a P75?
Hi,
On Friday I had a user ring me saying his P75 had stopped working, and
after a quick run through a few things, I got him to telnet to the box
and tell me the line status, which was a '-', as were B1 and B2.
Ringing
the box on a normal analog phone got me an engaged tone. Reset the P75,
no change.
Strange I thought, so I popped a look at the Ascend BRI troubleshooting
guide (http://www.ascend.com/2491.html) which confirmed that it should
only be one of 'P', '.' or 'X'.
So I configured one of my spare P75's and sent him on his way, but this
morning I received a phone call from someone else, and it turned out to
be
the same thing. The customers were opposite sides of the UK, so I could
rule out a local exchange problem.
Both customers are using ISDN-2 (Switch Type=U.K.) as opposed to ISDN-2e
(Net 3) and have been using the line regularly.
Anyone know what this '-' on the Link Status means?
Many thanks,
Aron
--
************** Aron Bibby Tel : +44 (0)117 922 9604
**** ***** Hewlett Packard Laboratories Fax : +44 (0)117 922 9742
** /_ __ *** Stoke Gifford Mobil: +44 (0)370 542 539
* / / /_/ ** Filton Road
** / *** Stoke Gifford EMail: aron_bibby@hp.com
**** ***** Bristol BS12 6QZ ab@hplb.hpl.hp.com
************** England aron@bibby.hpl.hp.com
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups: