Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) multilink ppp/windows98/maxtnt
What TAOS are you running on your TNT? I know on the MAX
boxes, you must be running at least 6.1.X -- I imagine that
there is an equivalent TAOS requirement on the TNT.
At 02:16 PM 10/5/98 -0500, you wrote:
>
>I'm trying to get multi-link ppp (mp) working using a plain windows 98
>client on my maxtnt box. The first line negotiates fine using MP, but when
>I try the second, it connects for a brief few seconds, looks as if it is
>adding the connect rates together, and then the second session drops back
>off again. This brief addition of the connection rates happens on both the
>windows 98 side and max side. In the status window of the maxtnt it
>momentarily adds the two connect rates together and shows a connection like
>80284 for a connect speed, then immediately drops back to 33600 or whatever.
>
>For the second session, the max records a disconnect cause 2, progress 65,
>but the radiusd in debug mode shows this:
>
> request: Ascend-Multilink-ID = 3
> request: Ascend-Num-In-Multilink = 1
>Oct 5 12:10:28.613 radiusd[6477] Received unknown attribute 51
>Oct 5 12:10:28.614 radiusd[6477] Received unknown attribute 50
> request: Ascend-Modem-PortNo = 30
> request: Ascend-Modem-SlotNo = 10
> request: Ascend-Modem-ShelfNo = 1
> request: Client-Port-DNIS = "5555555"
> request: Framed-Protocol = PPP
> request: Framed-Address = 0.0.0.0
>
>I changed my real number to 5555555, but nothing else. I find the 0.0.0.0
>address is curious. The first session stays the same.
>
>This happens in both the start record and stop record, except the 0.0.0.0
>address only appears in the second session's records. I'm not sure this
>unknown attribute has anything to do with my second session disconnects, but
>since it appears only when it is transfering replies that affect the
>multi-link I suspect they are related.
>
>Out of the 15 or so tries I've done, only once has it worked and maintained
>a connection. I got a 56K and a 31.2K and downloaded a .zip file at 6.9k/s.
>
>I'm using Ascend's radiusd, or ascendd if you like, altered slightly to do
>KERBEROS V authentication.
>
>
>Michael Johnson
>
>Network Specialist - Telecommunications - University of Oklahoma
>phone: 405.325.6290 fax: 405.325.7483 h323: 129.15.3.30 email:
>mjohnson@ou.edu
>http://www.telecom.ou.edu/
>
>++ Ascend Users Mailing List ++
>To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
>To get FAQ'd: <http://www.nealis.net/ascend/faq>
>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: