Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ASCEND) MPP on a Max4048 with tik.m40 5.0Ap42

Sorry, I was attempting to reply to someone in our tech support staff and
butterfingered the response.  My apologies.


Joe Shaw - jshaw@insync.net
NetAdmin - Insync Internet Services
Fortune: Pretend to spank me -- I'm a pseudo-masochist!

On Sat, 30 May 1998, Joe  Shaw wrote:

> Ok. 209.16.18.35/28
> 
> 
> Joe Shaw - jshaw@insync.net
> NetAdmin - Insync Internet Services
> Fortune: Pretend to spank me -- I'm a pseudo-masochist!
> 
> On Fri, 29 May 1998, R. Marc wrote:
> 
> > > Every time the unit connects the second channel drops immediately with a
> > > disconnect code 11
> > 
> > Well, the Framed-Route, Ascend-Base-Channel-Count and Ascend-Minimum-Channels,
> > are not necessary.  You already get that route with the address and netmask
> > commands.  The base and minimum statements are really only applicable if 
> > the max is dialing (which I'm assuming it's not).  Other than that I don't
> > see anything wrong with the profile.  You will need to be doing PAP on
> > the client side rather than a script; something you're probably already
> > doing.  
> > 
> > > username     Password = "passwd"
> > >         User-Service = Framed-User,
> > >         Framed-Protocol = MPP,
> > >         Framed-Address = 206.26.70.225,
> > >         Framed-Netmask = 255.255.255.240,
> > >         Framed-Route = "206.26.70.224/28 206.26.70.225 1",
> > >         Ascend-Base-Channel-Count = 2,
> > >         Ascend-Minimum-Channels = 2,
> > >         Ascend-Maximum-Channels = 2,
> > >         Ascend-Idle-Limit = 0
> > 
> > ++ Ascend Users Mailing List ++
> > To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
> > To get FAQ'd:	<http://www.nealis.net/ascend/faq>
> > 
> 
> ++ Ascend Users Mailing List ++
> To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd:	<http://www.nealis.net/ascend/faq>
> 

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>
References: