Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: (ASCEND) In Defense Of Ascend...

> Nicole
> 	 This is the way I understand this.  You have a 128K frame-relay
> circuit on this line and it keeps dropping after few minutes or hours. 
> 
> I DON'T understand.   This is a frame-relay circuit, it's suppose to be
> perminate connection.  There is a LMI keepalive that the router(P-130)
> sends to PacBell(PB) Cascade 9000 switch.  Once LMI is established the
> circuit should stay up unless there is some line problems or your router
> is over utilising the bandwidth.  


 Not according to pacbell. I was told they break the PVC if they dedect no traffic.


> I have few questions.
> 
> I) Does the router disconnect from PB when telnet or ssh times out?
> 

see above

> II) Do you stop passing traffic to your upstream?
> 
 something stops to loose the telnet/ssh connection.

> III) Is this a new circuit or have you had for a while.?
> 
new

> IV) Have you changed the setting recently?
> 
what setting?

> V) Who is your upstream and what equipment are they using?

max4004

> 
> VI) Are you over utilizing your bandwidth?

Not a chance. As I said, id happenes when that is the only thing going and there is no usage. Like being dropped by idleD excpet there isn't one.

> 
> VII) are you using ssh/telnet to a site beyond the router.

my router, of course.

> 
> What we must do is determine where the problem exist.  On the router or
> the circuit.

the P130 is a router/CSU/DSU.


 Nicole

 
> Take care
> 
> Mohamed
> 
> On Sun, 22 Mar 1998 nicole@webweaver.net wrote:
> 
> > > 
> > > Is the Frame circuit going down? or is telnet timing out? Could you make
> > > problem more detailed.
> > > 
> > > Mohamed
> > 
> > 
> >  When I try to access the session again I get "connection reset by peer."
> >  When I complained to PacBell thay said that they shut down the PVC when they don't detect anything on it, Thus I needed a higher keepalive setting to keep it up as it was probobly not sensitive enough to detect the telnet/ssh session.
> > 
> >  Hope this helps, It's most annoying.
> > 
> > Nicole
> > 
> > 
> > > 
> > > 
> > > On Sun, 22 Mar 1998 nicole@webweaver.net wrote:
> > > 
> > > > 
> > > > Greetings
> > > >  I am running a 128K frame on a pipeline 130. If I leave a telnet session open it will get killed after awhile. I belive this is do to the traffic not being enough to keep the path open on the frame circuit. 
> > > >  I have been told that there is a way to increase the "heartbeat" keep alive generated by the pipline to help with this. 
> > > > 
> > > > Does anyone know how to do this?
> > > > 
> > > > 
> > > >  Thanks
> > > > 
> > > >    Nicole
> > > > 
> > > >                      
> > > >  nicole@webweaver.net        |\ __ /|   (`\   http://www.webweaver.net/
> > > >  webmistress@dangermouse.org | o_o  |__  ) )  http://www.dangermouse.org/
> > > >  admin@mediacity.com        //      \\        http://www.mediacity.com/
> > > > ---------------------------(((---(((-------------------------------------
> > > >  
> > > >  -- Isn't it a bit unnerving that doctors call what they do practice?
> > > >  -- Why isn't there mouse-flavored cat food?
> > > > 
> > > >  -- I tried an internal modem once, but it hurt when I walked
> > > >  -- Microsoft: What bug would you like today?
> > > > 
> > > > --------------------------------------------------------------------------
> > > > 
> > > > ++ Ascend Users Mailing List ++
> > > > To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
> > > > To get FAQ'd:	<http://www.nealis.net/ascend/faq>
> > > > 
> > > 
> > > 
> > 
> > ---------------End of Original Message-----------------
> > 
> >                      
> >  nicole@webweaver.net        |\ __ /|   (`\   http://www.webweaver.net/
> >  webmistress@dangermouse.org | o_o  |__  ) )  http://www.dangermouse.org/
> >  admin@mediacity.com        //      \\        http://www.mediacity.com/
> > ---------------------------(((---(((-------------------------------------
> >  
> >              --  Powered by Coka Cola and FreeBSD  --
> > 
> >            -- Microsoft: What bug would you like today?  --
> >      -- I tried an internal modem once, but it hurt when I walked  --
> > 
> > --------------------------------------------------------------------------
> > 
> 
> 

---------------End of Original Message-----------------

                     
 nicole@webweaver.net        |\ __ /|   (`\   http://www.webweaver.net/
 webmistress@dangermouse.org | o_o  |__  ) )  http://www.dangermouse.org/
 admin@mediacity.com        //      \\        http://www.mediacity.com/
---------------------------(((---(((-------------------------------------
 
             --  Powered by Coka Cola and FreeBSD  --

           -- Microsoft: What bug would you like today?  --
     -- I tried an internal modem once, but it hurt when I walked  --

--------------------------------------------------------------------------

++ Ascend Users Mailing List ++
To unsubscribe:	send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd:	<http://www.nealis.net/ascend/faq>
References: