Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) Max 1800 - CallType = Nailed/MPP
Thanks...that works.
Do you know if this feature is for AScend to Ascend only?
I want to use regular MP to a Cisco.
Jim Howard wrote:
>
> At 20:38 1998/03/11 +0900, Peter Chow wrote:
> >I checked my Max manual and under the Configuring the WAN
> >section - Setting parameters for an MP+ link using multiple
> >nailed-up channels, it says I need to configure the connection
> >profile...Telco...Call Type = Nailed/MPP.
> >
> >I checked the Max 1800 (5.0Ap38) and it only has Nailed/Switched
> >and Perm/Switched.
>
> you will see this if you have set encaps=ppp,
> once set to mpp you will gain access to the "nailed/mpp" option
>
> -Jim H
> ----
> Jim Howard Sr Network Engineer Lyceum Internet
> jhoward@lyceum.com http://www.lyceum.com/ 404.248.1733
>
> My PGP Public Key: http://www.lyceum.com/~jhoward/pgp-key.txt
> Fingerprint: 7E8B E2BA 1314 2535 CB08 CFF9 119B 7CD3 2488 954D
>
> ++ Ascend Users Mailing List ++
> To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
> To get FAQ'd: <http://www.nealis.net/ascend/faq>
--
----------------------------------------------------------
Peter Chow
Chief Technical Advisor
InterQ Inc.
Tokyo, Japan
peter@interq.or.jp
----------------------------------------------------------
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
References: