Ascend Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: (ASCEND) P50/P130 setup
Tyler Myers wrote:
>
> On Tue, 10 Mar 1998, Darkshot wrote:
>
> > The trunks are all PRI, the unit is a MAX 4000. 5.0Ap38 with K56 12Mod
> > modems. Answer slots set to 0.
>
> umm... ok... if all you are doing is serving Analog DialUp and ISDN, then
> this may work.
>
> In System set Sub-Adr to None and set Serial, LAN, Dm, and V.110 to 0.
> Now go into each modem card and make sure you don't have any number set to
> be answered. Go into your WAN options under Ethernet and remove any
> answer number. And then gointo your answer profile and set ID Auth to
> ignore, and under Encaps set MPP, MP, PPP, V.120 and v.75 to yes.
>
> Give that a try and see if it works. Before you do that are you able to
> go into terminal modem and do
>
> test phonenumber.of.your.max data-svc=64K
>
> and have it work? You may need to give it area code and all. If test
> doesn't work, then give the above stuff a try.
>
The test number data-svc=64K works fine. Still immediate disconnect
from remote Pipeline.
--
Darkshot (Michael B. Garrett)
<http://www.gloryroad.net>
++ Ascend Users Mailing List ++
To unsubscribe: send unsubscribe to ascend-users-request@bungi.com
To get FAQ'd: <http://www.nealis.net/ascend/faq>
Follow-Ups: